Hinweis
Für den Zugriff auf diese Seite ist eine Autorisierung erforderlich. Sie können versuchen, sich anzumelden oder das Verzeichnis zu wechseln.
Für den Zugriff auf diese Seite ist eine Autorisierung erforderlich. Sie können versuchen, das Verzeichnis zu wechseln.
- Common Audio Properties
- Common Decoder Properties
- Common Encoder Properties
- Video Decoder Properties
- Audio Decoder Properties
- Video Encoder Properties
- Audio Encoder Properties
- MPEG Video Encoder Properties
- MPEG Audio Encoder Properties
- Dolby Digital Audio Decoder Properties
- Dolby Digital Audio Encoder Properties
- Digital Signal Processing (DSP) Properties
Common Audio Properties
These properties apply to both audio encoders and audio decoders.
| Property | Description |
|---|---|
| AVAudioChannelConfig | Gets the speaker configuration for the audio channels in the audio bit stream. |
| AVAudioChannelCount | Gets the number of channels in the audio bit stream. |
| AVAudioSampleRate | Gets the sample rate of the audio bit stream, in samples per seconds. |
| AVDDSurroundMode | Specifies whether the audio is encoded in Dolby Surround. |
Common Decoder Properties
These properties apply to both audio decoders and video decoders.
| Property | Description |
|---|---|
| AVDecCommonInputFormat | Specifies the current input format for the decoder. |
| AVDecCommonMeanBitRate | Gets the current mean bit rate of the decoder. |
| AVDecCommonOutputFormat | Specifies the output format for the decoder. |
| AVDecMmcssClass | Specifies the Multimedia Class Scheduler Service (MMCSS) class for the decoding thread. |
Common Encoder Properties
These properties apply to both audio encoders and video encoders.
| Property | Description |
|---|---|
| AVEncCodecType | Specifies the encoding scheme. |
| AVEncCommonBufferInLevel | Specifies the initial level of the encoding buffer. |
| AVEncCommonBufferOutLevel | Specifies the final level of the encoding buffer at the end of the encoding process. |
| AVEncCommonBufferSize | Specifies the size of the buffer used during encoding. |
| AVEncCommonFormatConstraint | Specifies the target format for an encoder. |
| AVEncCommonLowLatency | Specifies whether the output stream should be structured so that the encoded stream has a low decoding latency. |
| AVEncCommonMaxBitRate | Specifies the maximum bit rate. |
| AVEncCommonMeanBitRate | Specifies the average bit rate. |
| AVEncCommonMeanBitRateInterval | Specifies the time interval over which the average bit rate applies. |
| AVEncCommonMinBitRate | Specifies the minimum bit rate. |
| AVEncCommonMultipassMode | Specifies the number of encoding passes that the encoder supports. |
| AVEncCommonPassEnd | Stops the current encoding pass, or queries whether the current encoding pass is the last one. |
| AVEncCommonPassStart | Starts the first encoding pass. |
| AVEncCommonQuality | Specifies the quality level for encoding. |
| AVEncCommonQualityVsSpeed | Specifies the tradeoff between encoding quality and speed. |
| AVEncCommonRateControlMode | Specifies the rate control mode. |
| AVEncCommonRealTime | Specifies whether the application requires real-time encoding performance. |
| AVEncCommonStreamEndHandling | Specifies whether the encoder discards partial groups of pictures (GOPs) at the end of the stream. |
| AVEncMuxOutputStreamType | Specifies the type of output stream produced by a multiplexer. |
| AVEncStatCommonCompletedPasses | Specifies the number of completed encoding passes. |
Video Decoder Properties
| Property | Description |
|---|---|
| AVDecVideoAcceleration_H264 | Enables or disables hardware acceleration for H.264 video decoding. |
| AVDecVideoAcceleration_MPEG2 | Enables or disables hardware acceleration for MPEG-2 video decoding. |
| AVDecVideoAcceleration_VC1 | Enables or disables hardware acceleration for VC-1 video decoding. |
| AVDecVideoDropPicWithMissingRef | Specifies whether the decoder drops intra frames with missing reference frames. |
| AVDecVideoFastDecodeMode | Gets or sets the video decoding speed. |
| AVDecVideoImageSize | Gets the size of the decoded image, in pixels. |
| AVDecVideoInputScanType | Specifies how the decoded video stream is interlaced. |
| AVDecVideoPixelAspectRatio | Specifies the pixel aspect ratio of the decoded video stream. |
| AVDecVideoSoftwareDeinterlaceMode | Specifies the decoder's software deinterlace mode. |
| AVDecVideoSWPowerLevel | Specifies the power-saving level. |
| AVDecVideoThumbnailGenerationMode | Enables or disables thumbnail generation mode. |
Audio Decoder Properties
| Property | Description |
|---|---|
| AVDecAACDownmixMode | Specifies whether an AAC decoder uses standard MPEG-2/MPEG-4 stereo downmix equations, or uses a non-standard downmix. |
| AVDecAudioDualMono | Specifies whether 2-channel audio is encoded as stereo or dual mono. |
| AVDecAudioDualMonoReproMode | Specifies how the decoder reproduces dual mono audio. |
| AVDecHEAACDynamicRangeControl | Enables or disables dynamic range control in an AAC decoder. |
Video Encoder Properties
| Property | Description |
|---|---|
| AVEncInputVideoSystem | Specifies the video system of the source content. |
| AVEncStatVideoCodedFrames | Returns the number of video frames that were encoded. |
| AVEncStatVideoOutputFrameRate | Returns the average frame rate of the video content. |
| AVEncStatVideoTotalFrames | Returns the number of video frames that the encoder received. |
| AVEncVideoCBRMotionTradeoff | Specifies the tradeoff between motion and still images. |
| AVEncVideoCodedVideoAccessUnitSize | Specifies the size of the video access units. |
| AVEncVideoDefaultUpperFieldDominant | Specifies which field is displayed first. |
| AVEncVideoDisplayDimension | Specifies the size of the video stream when it is decoded. |
| AVEncVideoEncodeDimension | Specifies the width and height of the encoded video, if the video is cropped. |
| AVEncVideoEncodeOffsetOrigin | Specifies the left and top corners of the clipping rectangle, if the video is cropped. |
| AVEncVideoFieldSwap | Reverses the order of the interlaced fields in the source video. |
| AVEncVideoForceSourceScanType | Specifies whether the input frames are progressive or interlaced. |
| AVEncVideoHeaderDropFrame | Specifies the value of drop-frame flag in the GOP header. |
| AVEncVideoHeaderFrames | Specifies the starting frame number in the GOP header. |
| AVEncVideoHeaderHours | Specifies the starting hour number in the GOP header. |
| AVEncVideoHeaderMinutes | Specifies the starting minute number in the GOP header. |
| AVEncVideoHeaderSeconds | Specifies the starting second number in the GOP header. |
| AVEncVideoInputChromaResolution | Specifies the chroma resolution of the input video. |
| AVEncVideoInputChromaSubsampling | Specifies the chroma siting for the input video. |
| AVEncVideoInputColorLighting | Specifies the intended lighting conditions for viewing the input video. |
| AVEncVideoInputColorNominalRange | Specifies the nominal range for the input video. |
| AVEncVideoInputColorPrimaries | Specifies the color primaries for the input video. |
| AVEncVideoInputColorTransferFunction | Specifies the conversion function from RGB to R'G'B' for input video |
| AVEncVideoInputColorTransferMatrix | Specifies the conversion matrix from the Y'Cb'Cr' color space to the R'G'B' color space, for the input video. |
| AVEncVideoInverseTelecineEnable | Specifies whether the encoder performs inverse telecine. |
| AVEncVideoInverseTelecineThreshold | Sets the threshold at which the encoder considers a video field redundant. |
| AVEncVideoMaxKeyframeDistance | Specifies the maximum number of frames between key frames. |
| AVEncVideoNoOfFieldsToEncode | Specifies the number of fields to encode. |
| AVEncVideoNoOfFieldsToSkip | Specifies the number of fields to skip during encoding. |
| AVEncVideoOutputChromaResolution | Specifies the chroma resolution of the encoded video. |
| AVEncVideoOutputChromaSubsampling | Specifies the chroma siting for the encoded video. |
| AVEncVideoOutputColorLighting | Specifies the intended lighting conditions for viewing the encoded video. |
| AVEncVideoOutputColorNominalRange | Specifies the nominal range for the encoded video. |
| AVEncVideoOutputColorPrimaries | Specifies the color primaries for the encoded video. |
| AVEncVideoOutputColorTransferFunction | Specifies the conversion function from RGB to R'G'B' for encoded video. |
| AVEncVideoOutputColorTransferMatrix | Specifies the conversion matrix from the Y'Cb'Cr' color space to the R'G'B' color space, for the encoded video. |
| AVEncVideoOutputFrameRate | Specifies the frame rate on the encoder's output stream, in frames per second. |
| AVEncVideoOutputFrameRateConversion | Specifies whether the encoder converts the frame rate when the output frame rate does not match the input frame rate. |
| AVEncVideoOutputScanType | Specifies how the encoder interlaces the output video. |
| AVEncVideoPixelAspectRatio | Specifies the pixel aspect ratio. |
| AVEncVideoSourceFilmContent | Specifies whether the original source of the input video was film or video. |
| AVEncVideoSourceIsBW | Specifies whether the video is monochrome (black and white) or contains color. |
Audio Encoder Properties
| Property | Description |
|---|---|
| AVEncAudioDualMono | Specifies whether 2-channel audio is encoded as stereo or dual mono. |
| AVEncAudioInputContent | Specifies whether the audio content contains music or voice. |
| AVEncAudioIntervalToEncode | Specifies the number of audio samples to encode. |
| AVEncAudioIntervalToSkip | Specifies the number of audio samples for the encoder to skip. |
| AVEncAudioMapDestChannel N | Specifies which audio channel is mapped to channel N in the encoded audio stream. |
| AVEncAudioMeanBitRate | Specifies the average bit rate of the encoded audio stream. |
| AVEncStatAudioAverageBPS | Returns the average bits per second of the encoded audio. |
| AVEncStatAudioAveragePCMValue | Returns the average volume level of the audio content. |
| AVEncStatAudioPeakPCMValue | Returns the highest volume level that was present in the audio content. |
MPEG Video Encoder Properties
| Property | Description |
|---|---|
| AVEncMPVAddSeqEndCode | Specifies whether the encoder adds a sequence end code at the end of the stream. |
| AVEncMPVDefaultBPictureCount | Specifies the default number of consecutive B frames between I and P frames. |
| AVEncMPVFrameFieldMode | Specifies whether the encoder produces encoded fields or encoded frames. |
| AVEncMPVGenerateHeaderPicDispExt | Specifies whether the encoder generates picture display extension headers. |
| AVEncMPVGenerateHeaderPicExt | Specifies whether the encoder generates picture extension headers. |
| AVEncMPVGenerateHeaderSeqDispExt | Specifies whether the encoder generates sequence display extension headers. |
| AVEncMPVGenerateHeaderSeqExt | Specifies whether the encoder generates sequence extension headers. |
| AVEncMPVGenerateHeaderSeqScaleExt | Specifies whether the encoder generates sequence scalable extension headers. |
| AVEncMPVGOPOpen | Specifies whether the encoder produces open GOPs or closed GOPs. |
| AVEncMPVGOPSInSeq | Specifies the number of GOPs between sequence headers. |
| AVEncMPVGOPSize | Specifies the maximum number of pictures from one GOP header to the next GOP header. |
| AVEncMPVIntraDCPrecision | Specifies the precision of the DC coefficients. |
| AVEncMPVIntraVLCTable | Specifies which variable-length coding (VLC) table to use for entropy coding. |
| AVEncMPVLevel | Specifies the MPEG-2 level. |
| AVEncMPVProfile | Specifies the MPEG-2 profile. |
| AVEncMPVQScaleType | Specifies whether the quantizer scale is linear or non-linear. |
| AVEncMPVQuantMatrixChromaIntra | Specifies the chroma quantization matrix for intra macroblocks. |
| AVEncMPVQuantMatrixChromaNonIntra | Specifies the chroma quantization matrix for non-intra macroblocks. |
| AVEncMPVQuantMatrixIntra | Specifies the luma quantization matrix for intra macroblocks. |
| AVEncMPVQuantMatrixNonIntra | Specifies the luma quantization matrix for non-intra macroblocks. |
| AVEncMPVScanPattern | Specifies the macroblock scan pattern. |
| AVEncMPVSceneDetection | Specifies how the encoder behaves when it detects a new scene. |
| AVEncMPVUseConcealmentMotionVectors | Specifies whether the encoder uses concealment motion vectors. |
MPEG Audio Encoder Properties
| Property | Description |
|---|---|
| AVEncMPACodingMode | Specifies the MPEG-1 audio encoding mode. |
| AVEncMPACopyright | Specifies the default setting for the copyright bit. |
| AVEncMPAEmphasisType | Specifies the type of de-emphasis filter that should be used when decoding. |
| AVEncMPAEnableRedundancyProtection | Specifies whether to add a cyclic redundancy check (CRC) to the frame header. |
| AVEncMPALayer | Specifies the MPEG audio layer. |
| AVEncMPAOriginalBitstream | Specifies the default setting for the original bit. |
| AVEncMPAPrivateUserBit | Sets the value of the private user bit. |
Dolby Digital Audio Decoder Properties
| Property | Description |
|---|---|
| AVDecDDDynamicRangeScaleHigh | Specifies the high-level cut when the decoder performs dynamic range control. |
| AVDecDDDynamicRangeScaleLow | Specifies the low-level boost when the decoder performs dynamic range control. |
| AVDecDDOperationalMode | Specifies the compression control mode. |
Dolby Digital Audio Encoder Properties
| Property | Description |
|---|---|
| AVEncDDAtoDConverterType | Specifies the type of analog-to-digital (A/D) conversion. |
| AVEncDDCentreDownMixLevel | Specifies the center downmix level. |
| AVEncDDChannelBWLowPassFilter | Specifies whether a low pass filter is applied to the main input channels. |
| AVEncDDCopyright | Specifies the copyright flag. |
| AVEncDDDCHighPassFilter | Specifies whether a DC-blocking high pass filter is applied. |
| AVEncDDDialogNormalization | Specifies the dialog normalization level. |
| AVEncDDDigitalDeemphasis | Specifies whether digital de-emphasis. |
| AVEncDDDynamicRangeCompressionControl | Specifies the dynamic range control profile. |
| AVEncDDHeadphoneMode | Specifies the headphone mode. |
| AVEncDDLFELowPassFilter | Specifies whether a low pass filter is applied to the low frequency effect (LFE) channel. |
| AVEncDDLoRoCenterMixLvl_x10 | Specifies the level shift that is applied to the center channel for Lo/Ro downmixing. |
| AVEncDDLoRoSurroundMixLvl_x10 | Specifies the level shift that is applied to the Surround channels for Lo/Ro downmixing. |
| AVEncDDLtRtCenterMixLvl_x10 | Specifies the level shift that is applied to the center channel for Lt/Rt downmixing. |
| AVEncDDLtRtSurroundMixLvl_x10 | Specifies the level shift that is applied to the Surround channels for Lt/Rt downmixing. |
| AVEncDDOriginalBitstream | Specifies the original bitstream flag. |
| AVEncDDPreferredStereoDownMixMode | Specifies the preferred stereo downmix mode. |
| AVEncDDProductionInfoExists | Specifies the audio production information flag. |
| AVEncDDProductionMixLevel | Specifies the mixing level. |
| AVEncDDProductionRoomType | Specifies the room type. |
| AVEncDDRFPreEmphasisFilter | Specifies the RF overmodulation protection setting. |
| AVEncDDService | Specifies the audio service. |
| AVEncDDSurround3dBAttenuation | Specifies whether the Surround channels are attenuated before encoding. |
| AVEncDDSurround90DegreeePhaseShift | Specifies whether a 90-degree phase shift is applied to the Surround channels. |
| AVEncDDSurroundDownMixLevel | Specifies the Surround down mix level. |
| AVEncDDSurroundExMode | Specifies whether the audio stream is encoded in Surround EX. |
Digital Signal Processing (DSP) Properties
| Property | Description |
|---|---|
| AVDSPLoudnessEqualization | Enables or disables loudness equalization |
| AVDSPSpeakerFill | Enables or disables speaker fill |
Related topics