Edit

Share via

Set-DhcpServerv6Scope

Module:
DhcpServer Module

Modifies the properties of the IPv6 scope on the DHCP server service.

Syntax

Default (Default) 

Set-DhcpServerv6Scope
    [-Prefix] <IPAddress>
    [-Name <String>]
    [-Description <String>]
    [-State <String>]
    [-Preference <UInt16>]
    [-PreferredLifeTime <TimeSpan>]
    [-ValidLifeTime <TimeSpan>]
    [-T1 <TimeSpan>]
    [-T2 <TimeSpan>]
    [-ComputerName <String>]
    [-PassThru]
    [-CimSession <CimSession[]>]
    [-ThrottleLimit <Int32>]
    [-AsJob]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

Description

The Set-DhcpServerv6Scope cmdlet modifies the properties of the IPv6 scope on the Dynamic Host Configuration Protocol (DHCP) server service.

Examples

Example 1: Change the name of a scope

PS C:\> Set-DhcpServerv6Scope -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -Name "Ext Lab Net VLAN100" -State "Active"

This example changes the name of the specified DHCPv6 scope to Ext Lab Net VLAN100 and enables the scope.

Parameters

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell® background jobs, see about_Jobs.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Parameter properties

Type:

CimSession[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:Session

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-ComputerName

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the DHCP server service.

Parameter properties

Type:String
Default value:None
Supports wildcards:False
DontShow:False
Aliases:Cn

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Parameter properties

Type:SwitchParameter
Default value:False
Supports wildcards:False
DontShow:False
Aliases:cf

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-Description

Specifies the description to set on the scope.

Parameter properties

Type:String
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-Name

Specifies the new name to set for the scope.

Parameter properties

Type:String
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-Preference

Specifies the preference value of the DHCP server service. The DHCP server service that has the lowest preference value is selected by the DHCP client in case the client gets responses from more than one DHCP server service.

Parameter properties

Type:UInt16
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-PreferredLifeTime

Specifies the preferred life time of the IPv6 address leased by the DHCP server service. This parameter value should be same or less than the ValidLifeTime parameter value.

Parameter properties

Type:TimeSpan
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-Prefix

Specifies the IPv6 subnet prefix of the scope for which the properties are modified.

Parameter properties

Type:IPAddress
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:1
Mandatory:True
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-State

Specifies the state of the scope. The acceptable values for this parameter are: Active or Inactive.

Parameter properties

Type:String
Default value:None
Accepted values:Active, Inactive
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-T1

Specifies the lease renewal time. The DHCP client is expected to use a unicast message to renew the lease at the time specifies by this parameter value from the same DHCP server service from which DHCP client had at first obtained the lease. This parameter value should be less than the T2 and PreferredLifetime parameter values for the scope.

Parameter properties

Type:TimeSpan
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-T2

Specifies the lease rebind time. The client is expected to use a multi-cast message to renew the lease at the time equal to this parameter value from any DHCP server service if the renewal attempt at time specified by the T1 parameter fails. This parameter value should be larger than the T1 parameter value and less than the PreferredLifetime parameter value.

Parameter properties

Type:TimeSpan
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Parameter properties

Type:Int32
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-ValidLifeTime

Specifies the valid life time of the IPv6 address leased by the DHCP server service. This parameter value should be same or larger than the PreferredLifetime parameter value.

Parameter properties

Type:TimeSpan
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Parameter properties

Type:SwitchParameter
Default value:False
Supports wildcards:False
DontShow:False
Aliases:wi

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

Inputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.