Set-NfsNetgroupStore
Modifies netgroup configuration settings.
Syntax
Default (Default)
Set-NfsNetgroupStore
[-InputObject <CimInstance[]>]
[-NetgroupStoreType <String>]
[-NisServer <String>]
[-NisDomain <String>]
[-LdapServer <String>]
[-LDAPNamingContext <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Set-NfsNetgroupStore cmdlet modifies configuration settings that a Network File System (NFS) Server uses to obtain netgroups from a specified netgroup store.
An NFS server can get netgroups from Network Information Service (NIS) or RFC-2307-compliant Lightweight Directory Access Protocol (LDAP)-based stores, such as Active Directory Domain Services (AD DS) or Active Directory Lightweight Directory Services (AD LDS).
Examples
Example 1: Configure an NFS server to get netgroups from an LDAP store
PS C:\> Set-NfsNetgroupStore -NetgroupSourceType "LDAP" -LdapServer "Contoso.com"
This command configures an NFS server to get netgroups from an LDAP store that is named Contoso.com.
Example 2: Configure an NFS server to get netgroups from an NIS store
PS C:\> Set-NfsNetgroupStore -NetgroupSourceType "NIS" -NisServer "NIS.Contoso.com"
This command configures an NFS server to get netgroups from an NIS store that is named NIS.Contoso.com.
Parameters
-AsJob
Indicates that this cmdlet runs the command as a background job on a remote computer. Use this parameter to run commands that take an extensive time to finish.
When you use the AsJob parameter, the command returns an object that represents the job, and then displays the command prompt. You can continue to work in the session while the job finishes. To manage the job, use the Job cmdlets. To get the job results, use the Receive-Job cmdlet.
The AsJob parameter resembles using the Invoke-Command cmdlet to run a Start-Job command remotely. However, with AsJob, the job is created on the local computer, even though the job runs on a remote computer, and the results of the remote job are automatically returned to the local computer.
For more information about Windows PowerShell background jobs, see about_Jobs and about_Remote_Jobs.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-InputObject
Gets an array of Common Information Model (CIM) instances from a CIM server.
Parameter properties
| Type: | CimInstance[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LDAPNamingContext
Specifies an LDAP naming context that the NFS server uses when it performs LDAP queries to obtain netgroup information.
The NFS server uses this parameter only if the NetgroupSourceType parameter is set to LDAP. If NetgroupSourceType is set to NIS or None, the NFS server ignores the value set for this parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | ldapdn, nc |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LdapServer
Specifies an LDAP server name or an Active Directory domain name that stores netgroup information.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-NetgroupStoreType
Specifies the type of netgroup store. The acceptable values for this parameter are:
- LDAP
- NIS
- None
Parameter properties
| Type: | String |
| Default value: | None |
| Accepted values: | none, ldap, nis |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | netgrouptype |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-NisDomain
Specifies the NIS domain of the NIS server where information about netgroups is stored.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-NisServer
Specifies the host name of the NIS server where information about netgroups is stored.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
CimInstance
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.