Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This module manages and configures the Native Wi-Fi settings for the Remote Configuration Framework.
The following table shows the configurable settings for NATIVEWIFI.
| Value : Type | Access | Index | Description |
|---|---|---|---|
| SSID : STRING | Read-write | Not applicable | Specifies the network Service Set Identifier (SSID). This value can be a maximum of 32 bytes. |
| ChannelNo : DWORD | Read-write | Not applicable | Specifies the wireless channel number. |
| RegulatoryDomain : DWORD | Read-write | Not applicable | Specifies the regulatory domain. |
| BeaconPeriod : DWORD | Read-write | Not applicable | Specifies the beacon period, in milliseconds. |
| MaximumAssociations : DWORD | Read-write | Not applicable | Specifies the maximum number of clients that can associate with the access point (AP). |
| PhysicalType : DWORD | Read-write | Not applicable | Specifies the physical type of the underlying network adapter. This can be one of the following values:
|
| RTSThreshold : DWORD | Read-write | Not applicable | Specifies the Request To Send (RTS) threshold. This value, in bytes, specifies the packet size beyond which the 802.11 wireless LAN invokes its RTS mechanism. |
| FragmentationThreshold : DWORD | Read-write | Not applicable | Specifies the fragmentation threshold. This value, in bytes, determines whether packets will be fragmented and at what size. |
| DTIMPeriod : DWORD | Read-write | Not applicable | Specifies the number of beacon intervals that elapse between successive Delivery Traffic Indicator Messages (DTIMs). |
| AssociationIdleTimeOut : DWORD | Read-write | Not applicable | Specifies the number of seconds that must elapse before an inactive client is disassociated from the network. |
| AutoFrequencyEnabled : DWORD | Read-write | Not applicable | For AP mode, this value allows the AP to automatically select the best channel to use. |
| HiddenSSIDEnabled : DWORD | Read-write | Not applicable | When this value is set to 1, the SSID is hidden in the beacon. |
| uTransmittedFragmentCount : DWORD | Read-only | Not applicable | Specifies the number of data and management fragments that the network adapter has successfully transmitted. |
| uMulticastTransmittedFrameCount : DWORD | Read-only | Not applicable | Specifies the number of multicast frames that the network adapter has successfully transmitted. |
| uFailedCount : DWORD | Read-only | Not applicable | Specifies the number of network adapter frame transmissions that failed after exceeding either the short frame or the long frame retry limits. |
| uRetryCount : DWORD | Read-only | Not applicable | Specifies the number of frames that the network adapter successfully retransmitted after one or more retransmission attempts. |
| uMultipleRetryCount : DWORD | Read-only | Not applicable | Specifies the number of frames that the network adapter successfully retransmitted after more than one retransmission attempt. |
| uFrameDuplicateCount : DWORD | Read-only | Not applicable | Specifies the number of duplicate frames that were received. The sequence control field in the frame identifies duplicate frames. |
| uRTSSuccessCount : DWORD | Read-only | Not applicable | Specifies the number of times that the network adapter received a Clear To Send (CTS) in response. |
| uRTSFailureCount : DWORD | Read-only | Not applicable | Specifies the number of times that the network adapter did not receive a CTS in response to an RTS. |
| uACKFailureCount : DWORD | Read-only | Not applicable | Specifies the number of times that the network adapter expected an acknowledgement code that was not received. |
| uReceivedFragmentCount : DWORD | Read-only | Not applicable | Specifies the number of data and management fragments that the network adapter successfully received. |
| uMulticastReceivedFrameCount : DWORD | Read-only | Not applicable | Specifies the number of received frames that were set to multicast or broadcast. |
| PeerClientMac : STRING | Read-only | Handle | Specifies the MAC address of the associated client. |
| PeerClientUpTime : LONGLONG | Read-only | Handle | Specifies the uptime, in seconds of the client. |
| PeerClientTxSuccess : LONGLONG | Read-only | Handle | Specifies the number of times that transmit (TX) to the client has succeeded. |
| PeerClientTxFails : LONGLONG | Read-only | Handle | Specifies the number of times that transmit to the client has failed. |
| PeerClientRxSucceses : LONGLONG | Read-only | Handle | Specifies the number of times that receive (RX) from the client has succeeded. |
| PeerClientRxFails : LONGLONG | Read-only | Handle | Specifies the number of times that receive from the client has failed. |
| FilteredClientMac : STRING | Read-write | Handle | Specifies the MAC address of the filtered client. |
| FilteredClientStatus : DWORD | Read-write | Handle | Specifies the status of the filtered client. The following values are possible:
|
| SecurityMode : DWORD | Read-write | Not applicable | Specifies the security mode. The following values are possible:
|
| DefaultWEPKey : DWORD | Read-write | Not applicable | Specifies the default Wired Equivalent Privacy (WEP) key to use. |
| RepeaterAP : DWORD | Read-write | Not applicable | If this value is set to 1, the AP functions in repeater-AP mode. |
| WEPKey : STRING | Read-write | Handle | Specifies the WEP key. This value should be between 5 and 13 bytes in hexadecimal mode or between 10 and 26 bytes in ASCII mode. |
| WPAGroupKeyUpdateTimer : DWORD | Read-write | Not applicable | Specifies the interval, in seconds, for the Wi-Fi Protected Access (WPA) group rekeying. |
| WPAPskKey : STRING | Read-write | Not applicable | Specifies the WPA preshared key. This value can be a minimum of 8 bytes and a maximum of 64 bytes. |
See Also
Remote Configuration Framework Modules
Send Feedback on this topic to the authors