NDISTest 6.5 - WLANWakeTests - OSStack

This automated test suite validates the Wake on Wireless LAN capabilities.

Test details

Associated requirements	Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBWoWLAN.MustSupportWakeOnWLAN Device.Network.WLAN.WoWLAN.ImplementWakeOnWLAN See the device hardware requirements.
Platforms	Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86
Expected run time	~20 minutes
Categories	Certification Functional
Type	Automated

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

The following suites are available in this test:

The PM_WoWlanMagicpacket suite consists of the following tests:

Name	Description

The PM_WoWlanPattern suite consists of the following tesst:

Name	Description
Begin execution of Wake on LAN test for pattern type: RandomPattern	Put the device to sleep and send a matching packet. Make sure the device wakes in response to the packet. Put the device to sleep then send a non-matching packet. Make sure the device does not wake in response to the packet. Send a matching packet for a removed pattern and make sure the device does not wake. Verify that a simple send and receive works in both directions after the device is awake.
Begin execution of Wake on LAN test for pattern type: MaxSizePattern	Put the device to sleep and send a matching packet. Make sure the device wakes in response to the packet. Put the device to sleep then send a non-matching packet. Make sure the device does not wake in response to the packet. Send a matching packet for a removed pattern and make sure the device does not wake. Verify that a simple send and receive works in both directions after the device is awake.
Begin execution of capacity Wake on LAN test for pattern type: RandomPattern	Put the device to sleep and send a matching packet. Make sure the device wakes in response to the packet. Put the device to sleep and send a matching packet. Make sure the device wakes in response to the packet.

Parameter	Description
AP1Password	The root password for the first physical access point.
AP1IPAddress	The IP address of the WAN port of the first physical access point.
AP2Password	The root password for the second physical access point.
AP2IPAddress	The root password for the second physical access point.