Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This test suite verifies basic Wi-Fi Direct (WFD) pairing and rapid enumeration of devices during the discovery process (PeerWatcher).
Test details
Associated requirements |
Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast4Clients Device.Network.WLAN.WiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.WiFiDirect.SupportAtLeast4Clients |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~6 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
This test suite does the following:
Pairing
The system under test (SUT) acts as a listener and waits in discoverable mode.
The device under test (DUT) discovers the SUT and pairs with it.
If the system has previously been a Group Owner (GO) to a persistent pairing, an invitation is used. Otherwise, GO negotiation is performed. The pairing success is confirmed in five seconds.
Peer Watcher Discovery
The SUT acts as a device in listen mode.
The DUT starts a thread to discover the devices.
The DUT repeatedly enumerates already discovered devices every 50 milliseconds for 6 seconds. It is expected that discovery and all enumerate devices operations succeed.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Command syntax
| Parameter | Description |
|---|---|
PIN |
The WPS-PIN for WFD pairing. Default value: 12345670 |
Related topics