Edit

Share via

Storage card requirements

This section describes the general APDU command set requirements for non-ISO14443-4 compliant cards (known as storage cards).

General-Authenticate command

The General-Authenticate command is used to perform the authentication sequence on a MIFARE card. This command is only applicable for MIFARE Mini, Classic 1k and 4k cards.

General-Authenticate command format

Command Class INS P1 P2 Lc Data In
General-Authenticate 0xFF 0x86 0x00 0x00 0x01 Address MSB, Address LSB, Key Type A or B, Key Number

General-Authenticate response format

Response
SW1, SW2

Get-Data command

The Get-Data command is used to retrieve information from the contactless NFC tag/card.

Get-Data command format

Command Class INS P1 P2 L2
Get-Data 0xFF 0xCA 0x00: Serial number of the card (ISO14443-A: UID, ISO14443-B: PUPI, Felica: IDm, Jewel: RID)

0x01: Historical bytes of the card (Type A: Historical bytes from ATR, Type B: ATTRIB response)		 0x00 0x00

Get-Data response format

Response
Data out, SW1, SW2

Load-Key command

The Load-Key command is used to store MIFARE keys in the driver. This command is only applicable for MIFARE Mini, Classic 1k and 4k cards.

Load-Key command format

Command Class INS P1 P2 Lc Data In
Load-Key 0xFF 0x82 Key Structure Key Number 0x6 Key Value

Load-Key response format

Response
SW1, SW2

Manage Session command

The implementation of this command should be per the PCSC specification.

Manage Session command format

Command Class INS P1 P2 Lc Data In
General Authenticate 0xFF 0xC2 0x00 0x00 Variable TLV Data Object

The following are required TLV data objects to be supported by the driver:

Tag Data Object
0x80 Version data object
0x81 Start Transparent Session
0x82 End Transparent Session

Read-Binary command

The Read-Binary command is used to read data from the contactless NFC tag/card. The command is applicable only for storage cards (MIFARE Classic/UL, Felica, ISO15693 and Jewel/Topaz cards).

Read-Binary command format

Command Class INS P1 P2 Lc Data In Li
Read-Binary 0xFF 0xB0 Address MSB Address LSB Length of Data In Data Length expected

Read-Binary MIFARE family

Command CLA INS P1 P2 Le
UL READ 16 0xFF 0xB0 0x00 0x00 to 0x15 0x10
CL 1k READ 16 0xFF 0xB0 0x00 0x00 to 0x3F 0x10
CL 4k READ 16 0xFF 0xB0 0x00 0x00 to 0xFF 0x10

Read-Binary Jewel family

Command CLA INS P1 P2 Le
READ ALL 0xFF 0xB0 0x00 0x00 0x00
RID 0xFF 0xB0 0x00 0x00 0x06
READ 0xFF 0xB0 Block No Block Offset 0x01
READ 8 0xFF 0xB0 Block No 0x00 0x08
READ SEG 0xFF 0xB0 0x00 Segment Addr 0x80

Read-Binary Felica family

Command CLA INS P1 P2 Lc Data In
CHECK 0xFF 0xB0 0x00 0x00 Length of Data In Number of Service, Number of Blocks, Block list

ISO 15693 family

Command CLA INS P1 P2 Le
READ 0xFF 0xB0 Block Number 0x00 0x04

ISO 15693 family Response

Response
Data out, SW1, SW2

Transparent exchange command

Transparent exchange command format

Command Class INS P1 P2 Lc Data In
General Authenticate 0xFF 0xC2 0x00 0x01 Variable TLV Data Object

The following are the required TLV data objects for Transparent Exchange Command to be supported by the driver for transparent exchange of commands to storage cards:

Tag Data Object
0x95 Transceive - Transmit and receive
0x5F46 Timer

Update-Binary command

The Update-Binary command is used to write data to the contactless NFC tag/card. The command is applicable only for storage cards (MIFARE Classic/UL, Felica, ISO15693 and Jewel/Topaz cards). The format of the request and response for the command is as described below.

Update-Binary command format

Command Class INS P1 P2 Lc Data In
Update-Binary 0xFF 0xD6 Address MSB Address LSB Length of Data In Data

Update-Binary MIFARE family

Command CLA INS P1 P2 Le
UL WRITE 4 0xFF 0xD6 0x00 0x00 to 0x15 0x04
CL 1k WRITE 16 0xFF 0xD6 0x00 0x00 to 0x3F 0x10
CL 4k WRITE 16 0xFF 0xB0 0x00 0x00 to 0xFF 0x10

Update-Binary Jewel family

Command CLA INS P1 P2 Le
WRITE1-E 0xFF 0xD6 Block Number Block Offset 0x01
WRITE8-E 0xFF 0xD6 Block Number 0x00 0x08

Update-Binary Felica family

Command CLA INS P1 P2 Le Data In
UPDATE 0xFF 0xD6 0x00 0x00 Length of Data In Number of Service, Number of blocks, Block list

Response format

Command CLA INS P1 P2 Le
WRITE 0xFF 0xD6 Block Number 0x00 0x04
  • Last updated on