Edit

Share via

ATTRIBUTEID enumeration (sdoias.h)

Note  Internet Authentication Service (IAS) was renamed Network Policy Server (NPS) starting with Windows Server 2008. The content of this topic applies to both IAS and NPS. Throughout the text, NPS is used to refer to all versions of the service, including the versions originally referred to as IAS.
 
The ATTRIBUTEID enumeration type enumerates the RADIUS attributes supported by the SDO API.

Syntax

typedef enum _ATTRIBUTEID {
  ATTRIBUTE_UNDEFINED = 0,
  ATTRIBUTE_MIN_VALUE = 1,
  RADIUS_ATTRIBUTE_USER_NAME,
  RADIUS_ATTRIBUTE_USER_PASSWORD,
  RADIUS_ATTRIBUTE_CHAP_PASSWORD,
  RADIUS_ATTRIBUTE_NAS_IP_ADDRESS,
  RADIUS_ATTRIBUTE_NAS_PORT,
  RADIUS_ATTRIBUTE_SERVICE_TYPE,
  RADIUS_ATTRIBUTE_FRAMED_PROTOCOL,
  RADIUS_ATTRIBUTE_FRAMED_IP_ADDRESS,
  RADIUS_ATTRIBUTE_FRAMED_IP_NETMASK,
  RADIUS_ATTRIBUTE_FRAMED_ROUTING = 10,
  RADIUS_ATTRIBUTE_FILTER_ID,
  RADIUS_ATTRIBUTE_FRAMED_MTU,
  RADIUS_ATTRIBUTE_FRAMED_COMPRESSION,
  RADIUS_ATTRIBUTE_LOGIN_IP_HOST,
  RADIUS_ATTRIBUTE_LOGIN_SERVICE,
  RADIUS_ATTRIBUTE_LOGIN_TCP_PORT,
  RADIUS_ATTRIBUTE_UNASSIGNED1,
  RADIUS_ATTRIBUTE_REPLY_MESSAGE,
  RADIUS_ATTRIBUTE_CALLBACK_NUMBER,
  RADIUS_ATTRIBUTE_CALLBACK_ID = 20,
  RADIUS_ATTRIBUTE_UNASSIGNED2,
  RADIUS_ATTRIBUTE_FRAMED_ROUTE,
  RADIUS_ATTRIBUTE_FRAMED_IPX_NETWORK,
  RADIUS_ATTRIBUTE_STATE,
  RADIUS_ATTRIBUTE_CLASS,
  RADIUS_ATTRIBUTE_VENDOR_SPECIFIC,
  RADIUS_ATTRIBUTE_SESSION_TIMEOUT,
  RADIUS_ATTRIBUTE_IDLE_TIMEOUT,
  RADIUS_ATTRIBUTE_TERMINATION_ACTION,
  RADIUS_ATTRIBUTE_CALLED_STATION_ID = 30,
  RADIUS_ATTRIBUTE_CALLING_STATION_ID,
  RADIUS_ATTRIBUTE_NAS_IDENTIFIER,
  RADIUS_ATTRIBUTE_PROXY_STATE,
  RADIUS_ATTRIBUTE_LOGIN_LAT_SERVICE,
  RADIUS_ATTRIBUTE_LOGIN_LAT_NODE,
  RADIUS_ATTRIBUTE_LOGIN_LAT_GROUP,
  RADIUS_ATTRIBUTE_FRAMED_APPLETALK_LINK,
  RADIUS_ATTRIBUTE_FRAMED_APPLETALK_NET,
  RADIUS_ATTRIBUTE_FRAMED_APPLETALK_ZONE,
  RADIUS_ATTRIBUTE_ACCT_STATUS_TYPE = 40,
  RADIUS_ATTRIBUTE_ACCT_DELAY_TIME,
  RADIUS_ATTRIBUTE_ACCT_INPUT_OCTETS,
  RADIUS_ATTRIBUTE_ACCT_OUTPUT_OCTETS,
  RADIUS_ATTRIBUTE_ACCT_SESSION_ID,
  RADIUS_ATTRIBUTE_ACCT_AUTHENTIC,
  RADIUS_ATTRIBUTE_ACCT_SESSION_TIME,
  RADIUS_ATTRIBUTE_ACCT_INPUT_PACKETS,
  RADIUS_ATTRIBUTE_ACCT_OUTPUT_PACKETS,
  RADIUS_ATTRIBUTE_ACCT_TERMINATE_CAUSE,
  RADIUS_ATTRIBUTE_ACCT_MULTI_SSN_ID = 50,
  RADIUS_ATTRIBUTE_ACCT_LINK_COUNT = 51,
  RADIUS_ATTRIBUTE_CHAP_CHALLENGE = 60,
  RADIUS_ATTRIBUTE_NAS_PORT_TYPE,
  RADIUS_ATTRIBUTE_PORT_LIMIT,
  RADIUS_ATTRIBUTE_LOGIN_LAT_PORT,
  RADIUS_ATTRIBUTE_TUNNEL_TYPE,
  RADIUS_ATTRIBUTE_TUNNEL_MEDIUM_TYPE,
  RADIUS_ATTRIBUTE_TUNNEL_CLIENT_ENDPT,
  RADIUS_ATTRIBUTE_TUNNEL_SERVER_ENDPT,
  RADIUS_ATTRIBUTE_ACCT_TUNNEL_CONN,
  RADIUS_ATTRIBUTE_TUNNEL_PASSWORD,
  RADIUS_ATTRIBUTE_ARAP_PASSWORD = 70,
  RADIUS_ATTRIBUTE_ARAP_FEATURES,
  RADIUS_ATTRIBUTE_ARAP_ZONE_ACCESS,
  RADIUS_ATTRIBUTE_ARAP_SECURITY,
  RADIUS_ATTRIBUTE_ARAP_SECURITY_DATA,
  RADIUS_ATTRIBUTE_PASSWORD_RETRY,
  RADIUS_ATTRIBUTE_PROMPT = 76,
  RADIUS_ATTRIBUTE_CONNECT_INFO,
  RADIUS_ATTRIBUTE_CONFIGURATION_TOKEN,
  RADIUS_ATTRIBUTE_EAP_MESSAGE,
  RADIUS_ATTRIBUTE_SIGNATURE = 80,
  RADIUS_ATTRIBUTE_TUNNEL_PVT_GROUP_ID,
  RADIUS_ATTRIBUTE_TUNNEL_ASSIGNMENT_ID,
  RADIUS_ATTRIBUTE_TUNNEL_PREFERENCE,
  RADIUS_ATTRIBUTE_ARAP_CHALLENGE_RESPONSE,
  RADIUS_ATTRIBUTE_ACCT_INTERIM_INTERVAL = 85,
  RADIUS_ATTRIBUTE_NAS_IPv6_ADDRESS = 95,
  RADIUS_ATTRIBUTE_FRAMED_INTERFACE_ID,
  RADIUS_ATTRIBUTE_FRAMED_IPv6_PREFIX,
  RADIUS_ATTRIBUTE_LOGIN_IPv6_HOST,
  RADIUS_ATTRIBUTE_FRAMED_IPv6_ROUTE,
  RADIUS_ATTRIBUTE_FRAMED_IPv6_POOL = 100,
  IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_IP_ADDRESS = 0x1000,
  IAS_ATTRIBUTE_SAVED_RADIUS_CALLBACK_NUMBER,
  IAS_ATTRIBUTE_NP_CALLING_STATION_ID,
  IAS_ATTRIBUTE_SAVED_NP_CALLING_STATION_ID,
  IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_ROUTE,
  IAS_ATTRIBUTE_IGNORE_USER_DIALIN_PROPERTIES,
  IAS_ATTRIBUTE_NP_TIME_OF_DAY,
  IAS_ATTRIBUTE_NP_CALLED_STATION_ID,
  IAS_ATTRIBUTE_NP_ALLOWED_PORT_TYPES = 0x1008,
  IAS_ATTRIBUTE_NP_AUTHENTICATION_TYPE,
  IAS_ATTRIBUTE_NP_ALLOWED_EAP_TYPE,
  IAS_ATTRIBUTE_SHARED_SECRET,
  IAS_ATTRIBUTE_CLIENT_IP_ADDRESS,
  IAS_ATTRIBUTE_CLIENT_PACKET_HEADER,
  IAS_ATTRIBUTE_TOKEN_GROUPS,
  IAS_ATTRIBUTE_ALLOW_DIALIN,
  IAS_ATTRIBUTE_REQUEST_ID = 0x1010,
  IAS_ATTRIBUTE_MANIPULATION_TARGET,
  IAS_ATTRIBUTE_MANIPULATION_RULE,
  IAS_ATTRIBUTE_ORIGINAL_USER_NAME,
  IAS_ATTRIBUTE_CLIENT_VENDOR_TYPE,
  IAS_ATTRIBUTE_CLIENT_UDP_PORT,
  MS_ATTRIBUTE_CHAP_CHALLENGE,
  MS_ATTRIBUTE_CHAP_RESPONSE,
  MS_ATTRIBUTE_CHAP_DOMAIN = 0x1018,
  MS_ATTRIBUTE_CHAP_ERROR,
  MS_ATTRIBUTE_CHAP_CPW1,
  MS_ATTRIBUTE_CHAP_CPW2,
  MS_ATTRIBUTE_CHAP_LM_ENC_PW,
  MS_ATTRIBUTE_CHAP_NT_ENC_PW,
  MS_ATTRIBUTE_CHAP_MPPE_KEYS,
  IAS_ATTRIBUTE_AUTHENTICATION_TYPE,
  IAS_ATTRIBUTE_CLIENT_NAME = 0x1020,
  IAS_ATTRIBUTE_NT4_ACCOUNT_NAME,
  IAS_ATTRIBUTE_FULLY_QUALIFIED_USER_NAME,
  IAS_ATTRIBUTE_NTGROUPS,
  IAS_ATTRIBUTE_EAP_FRIENDLY_NAME,
  IAS_ATTRIBUTE_AUTH_PROVIDER_TYPE,
  MS_ATTRIBUTE_ACCT_AUTH_TYPE,
  MS_ATTRIBUTE_ACCT_EAP_TYPE,
  IAS_ATTRIBUTE_PACKET_TYPE = 0x1028,
  IAS_ATTRIBUTE_AUTH_PROVIDER_NAME,
  IAS_ATTRIBUTE_ACCT_PROVIDER_TYPE,
  IAS_ATTRIBUTE_ACCT_PROVIDER_NAME,
  MS_ATTRIBUTE_MPPE_SEND_KEY,
  MS_ATTRIBUTE_MPPE_RECV_KEY,
  IAS_ATTRIBUTE_REASON_CODE,
  MS_ATTRIBUTE_FILTER,
  MS_ATTRIBUTE_CHAP2_RESPONSE = 0x1030,
  MS_ATTRIBUTE_CHAP2_SUCCESS,
  MS_ATTRIBUTE_CHAP2_CPW,
  MS_ATTRIBUTE_RAS_VENDOR,
  MS_ATTRIBUTE_RAS_VERSION,
  IAS_ATTRIBUTE_NP_NAME,
  MS_ATTRIBUTE_PRIMARY_DNS_SERVER,
  MS_ATTRIBUTE_SECONDARY_DNS_SERVER,
  MS_ATTRIBUTE_PRIMARY_NBNS_SERVER = 0x1038,
  MS_ATTRIBUTE_SECONDARY_NBNS_SERVER,
  IAS_ATTRIBUTE_PROXY_POLICY_NAME,
  IAS_ATTRIBUTE_PROVIDER_TYPE,
  IAS_ATTRIBUTE_PROVIDER_NAME,
  IAS_ATTRIBUTE_REMOTE_SERVER_ADDRESS,
  IAS_ATTRIBUTE_GENERATE_CLASS_ATTRIBUTE,
  MS_ATTRIBUTE_RAS_CLIENT_NAME,
  MS_ATTRIBUTE_RAS_CLIENT_VERSION = 0x1040,
  IAS_ATTRIBUTE_ALLOWED_CERTIFICATE_EKU,
  IAS_ATTRIBUTE_EXTENSION_STATE,
  IAS_ATTRIBUTE_GENERATE_SESSION_TIMEOUT,
  IAS_ATTRIBUTE_SESSION_TIMEOUT,
  MS_ATTRIBUTE_QUARANTINE_IPFILTER,
  MS_ATTRIBUTE_QUARANTINE_SESSION_TIMEOUT,
  MS_ATTRIBUTE_USER_SECURITY_IDENTITY,
  IAS_ATTRIBUTE_REMOTE_RADIUS_TO_WINDOWS_USER_MAPPING = 0x1048,
  IAS_ATTRIBUTE_PASSPORT_USER_MAPPING_UPN_SUFFIX,
  IAS_ATTRIBUTE_TUNNEL_TAG,
  IAS_ATTRIBUTE_NP_PEAPUPFRONT_ENABLED,
  IAS_ATTRIBUTE_CERTIFICATE_EKU = 8097,
  IAS_ATTRIBUTE_EAP_CONFIG,
  IAS_ATTRIBUTE_PEAP_EMBEDDED_EAP_TYPEID,
  IAS_ATTRIBUTE_PEAP_FAST_ROAMED_SESSION = 8100,
  IAS_ATTRIBUTE_EAP_TYPEID,
  MS_ATTRIBUTE_EAP_TLV,
  IAS_ATTRIBUTE_REJECT_REASON_CODE,
  IAS_ATTRIBUTE_PROXY_EAP_CONFIG,
  IAS_ATTRIBUTE_EAP_SESSION,
  IAS_ATTRIBUTE_IS_REPLAY,
  IAS_ATTRIBUTE_CLEAR_TEXT_PASSWORD,
  MS_ATTRIBUTE_IDENTITY_TYPE,
  MS_ATTRIBUTE_SERVICE_CLASS,
  MS_ATTRIBUTE_QUARANTINE_USER_CLASS = 8110,
  MS_ATTRIBUTE_QUARANTINE_STATE,
  IAS_ATTRIBUTE_OVERRIDE_RAP_AUTH,
  IAS_ATTRIBUTE_PEAP_CHANNEL_UP,
  IAS_ATTRIBUTE_NAME_MAPPED,
  IAS_ATTRIBUTE_POLICY_ENFORCED,
  IAS_ATTRIBUTE_MACHINE_NTGROUPS,
  IAS_ATTRIBUTE_USER_NTGROUPS,
  IAS_ATTRIBUTE_MACHINE_TOKEN_GROUPS,
  IAS_ATTRIBUTE_USER_TOKEN_GROUPS,
  MS_ATTRIBUTE_QUARANTINE_GRACE_TIME = 8120,
  IAS_ATTRIBUTE_QUARANTINE_URL,
  IAS_ATTRIBUTE_QUARANTINE_FIXUP_SERVERS,
  MS_ATTRIBUTE_NOT_QUARANTINE_CAPABLE,
  IAS_ATTRIBUTE_QUARANTINE_SYSTEM_HEALTH_RESULT,
  IAS_ATTRIBUTE_QUARANTINE_SYSTEM_HEALTH_VALIDATORS,
  IAS_ATTRIBUTE_MACHINE_NAME,
  IAS_ATTRIBUTE_NT4_MACHINE_NAME,
  IAS_ATTRIBUTE_QUARANTINE_SESSION_HANDLE,
  IAS_ATTRIBUTE_FULLY_QUALIFIED_MACHINE_NAME,
  IAS_ATTRIBUTE_QUARANTINE_FIXUP_SERVERS_CONFIGURATION = 8130,
  IAS_ATTRIBUTE_CLIENT_QUARANTINE_COMPATIBLE,
  MS_ATTRIBUTE_NETWORK_ACCESS_SERVER_TYPE,
  IAS_ATTRIBUTE_QUARANTINE_SESSION_ID,
  MS_ATTRIBUTE_AFW_QUARANTINE_ZONE,
  MS_ATTRIBUTE_AFW_PROTECTION_LEVEL,
  IAS_ATTRIBUTE_QUARANTINE_UPDATE_NON_COMPLIANT,
  IAS_ATTRIBUTE_REQUEST_START_TIME,
  MS_ATTRIBUTE_MACHINE_NAME,
  IAS_ATTRIBUTE_CLIENT_IPv6_ADDRESS,
  IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_INTERFACE_ID = 8140,
  IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_IPv6_PREFIX,
  IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_IPv6_ROUTE,
  MS_ATTRIBUTE_QUARANTINE_GRACE_TIME_CONFIGURATION,
  MS_ATTRIBUTE_IPv6_FILTER = 8144,
  MS_ATTRIBUTE_IPV4_REMEDIATION_SERVERS,
  MS_ATTRIBUTE_IPV6_REMEDIATION_SERVERS,
  IAS_ATTRIBUTE_PROXY_RETRY_COUNT,
  IAS_ATTRIBUTE_MACHINE_INVENTORY,
  IAS_ATTRIBUTE_ABSOLUTE_TIME,
  MS_ATTRIBUTE_QUARANTINE_SOH = 8150,
  IAS_ATTRIBUTE_EAP_TYPES_CONFIGURED_IN_PROXYPOLICY,
  MS_ATTRIBUTE_HCAP_LOCATION_GROUP_NAME,
  MS_ATTRIBUTE_EXTENDED_QUARANTINE_STATE,
  IAS_ATTRIBUTE_SOH_CARRIER_EAPTLV,
  MS_ATTRIBUTE_HCAP_USER_GROUPS = 8155,
  IAS_ATTRIBUTE_SAVED_MACHINE_HEALTHCHECK_ONLY,
  IAS_ATTRIBUTE_POLICY_EVALUATED_SHV,
  MS_ATTRIBUTE_RAS_CORRELATION_ID,
  MS_ATTRIBUTE_HCAP_USER_NAME,
  IAS_ATTRIBUTE_NT4_HCAP_ACCOUNT_NAME = 8160,
  IAS_ATTRIBUTE_USER_TOKEN_SID,
  IAS_ATTRIBUTE_MACHINE_TOKEN_SID,
  IAS_ATTRIBUTE_MACHINE_VALIDATED,
  MS_ATTRIBUTE_USER_IPv4_ADDRESS,
  MS_ATTRIBUTE_USER_IPv6_ADDRESS = 8165,
  MS_ATTRIBUTE_TSG_DEVICE_REDIRECTION,
  IAS_ATTRIBUTE_ACCEPT_REASON_CODE,
  IAS_ATTRIBUTE_LOGGING_RESULT,
  IAS_ATTRIBUTE_SERVER_IP_ADDRESS,
  IAS_ATTRIBUTE_SERVER_IPv6_ADDRESS,
  IAS_ATTRIBUTE_RADIUS_USERNAME_ENCODING_ASCII,
  MS_ATTRIBUTE_RAS_ROUTING_DOMAIN_ID = 8172,
  MS_ATTRIBUTE_AZURE_POLICY_ID,
  IAS_ATTRIBUTE_CERTIFICATE_THUMBPRINT = 8250,
  RAS_ATTRIBUTE_ENCRYPTION_TYPE,
  RAS_ATTRIBUTE_ENCRYPTION_POLICY,
  RAS_ATTRIBUTE_BAP_REQUIRED,
  RAS_ATTRIBUTE_BAP_LINE_DOWN_TIME,
  RAS_ATTRIBUTE_BAP_LINE_DOWN_LIMIT
} ATTRIBUTEID;

Constants

 
ATTRIBUTE_UNDEFINED
Value: 0
Specifies a value equal to zero, and used as the NULL terminator in an array of attributes.
ATTRIBUTE_MIN_VALUE
Value: 1
Specifies the minimum value for values of this enumeration type.
RADIUS_ATTRIBUTE_USER_NAME
Specifies the name of the user to be authenticated. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_USER_PASSWORD
Specifies the password of the user to be authenticated. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_CHAP_PASSWORD
Specifies the password provided by the user in response to an MD5 Challenge Handshake Authentication Protocol (CHAP) challenge. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_NAS_IP_ADDRESS
Specifies the Network Access Server (NAS) IP address. An Access-Request should specify either an NAS IP address or an NAS identifier. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_NAS_PORT
Specifies the physical or virtual private network (VPN) through which the user is connecting to the NAS. Note that this value is not a port number in the sense of TCP or UDP. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_SERVICE_TYPE
Specifies the type of service the user has requested or the type of service to be provided. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_PROTOCOL
Specifies the type of framed protocol to use for framed access, for example SLIP, PPP, or ARAP (AppleTalk Remote Access Protocol). For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_IP_ADDRESS
Specifies the IP address that is configured for the user requesting authentication. This attribute is typically returned by the authentication provider. However, the NAS may use it in an authentication request to specify a preferred IP address. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_IP_NETMASK
Specifies the IP network mask for a user that is a router to a network. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_ROUTING
Value: 10
Specifies the routing method for a user that is a router to a network. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FILTER_ID
Specifies the filter list for the user requesting authentication. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_MTU
Specifies the Maximum Transmission Unit (MTU) for the user. This attribute is used in cases where the MTU is not negotiated through some other means, such as PPP. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_COMPRESSION
Specifies a compression protocol to use for the connection. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_LOGIN_IP_HOST
Specifies the system with which to connect the user. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_LOGIN_SERVICE
Specifies the service to use to connect the user to the host specified by raatLoginIPHost. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_LOGIN_TCP_PORT
Specifies the port to which to connect the user. This attribute is present only if the raatLoginService attribute is present. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_UNASSIGNED1
This value is currently unassigned.
RADIUS_ATTRIBUTE_REPLY_MESSAGE
Specifies a message to display to the user. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_CALLBACK_NUMBER
Specifies a callback number. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_CALLBACK_ID
Value: 20
Specifies a location to call back. The value of this attribute is interpreted by the NAS. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_UNASSIGNED2
This value is currently unassigned. The value field in for this type is also undefined.
RADIUS_ATTRIBUTE_FRAMED_ROUTE
Specifies routing information to configure on the NAS for the user. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_IPX_NETWORK
Specifies the IPX network number to configure for the user. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_STATE
Specifies state information provided to the client by the server. Refer to
RFC 2865 for detailed information about this value. The value field in for this type is a pointer.
RADIUS_ATTRIBUTE_CLASS
Specifies a value that is provided to the NAS by the authentication provider. The NAS should use this value when communicating with the accounting provider. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_VENDOR_SPECIFIC
Specifies a field for vendor-supplied extended attributes. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_SESSION_TIMEOUT
Specifies the maximum number of seconds for which to provide service to the user. After this time, the session is terminated. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_IDLE_TIMEOUT
Specifies the maximum number of consecutive seconds the session can be idle. If the idle time exceeds this value, the session is terminated. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_TERMINATION_ACTION
Specifies an action the server performs when time the connection terminates. Refer to the above-referenced files for detailed information about this value. The value field in for this type is 32-bit integral value. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_CALLED_STATION_ID
Value: 30
Specifies the number that the user dialed to connect to the NAS. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_CALLING_STATION_ID
Specifies the number from which the user is calling. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_NAS_IDENTIFIER
Specifies the NAS identifier. An Access-Request should specify either an NAS identifier or an NAS IP address. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_PROXY_STATE
Specifies a value that a proxy server includes when forwarding an authentication request. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_LOGIN_LAT_SERVICE
Specifies an attribute that is not currently used for authentication on Windows. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_LOGIN_LAT_NODE
Specifies an attribute that is not currently used for authentication on Windows. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_LOGIN_LAT_GROUP
Specifies an attribute that is not currently used for authentication on Windows. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_APPLETALK_LINK
Specifies the AppleTalk network number for the user when the user is another router. The value field in for this type is 32-bit integral value. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_APPLETALK_NET
Specifies the AppleTalk network number that the NAS should use to allocate an AppleTalk node for the user. This attribute is used only when the user is not another router. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_FRAMED_APPLETALK_ZONE
Specifies the AppleTalk default zone for the user. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_ACCT_STATUS_TYPE
Value: 40
Specifies whether the accounting provider should start or stop accounting for the user. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_DELAY_TIME
Specifies the length of time that the client has been attempting to send the current request. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_INPUT_OCTETS
Specifies the number of octets that have been received during the current accounting session. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_OUTPUT_OCTETS
Specifies the number of octets that were sent during the current accounting session. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_SESSION_ID
Specifies a value to enable the identification of matching start and stop records within a log file. The start and stop records are sent in the raatAcctStatusType attribute. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_AUTHENTIC
Specifies, to the accounting provider, how the user was authenticated; for example by Windows Directory Services, RADIUS, or some other authentication provider. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_SESSION_TIME
Specifies the number of seconds that have elapsed in the current accounting session. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_INPUT_PACKETS
Specifies the number of packets that are received during the current accounting session. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_OUTPUT_PACKETS
Specifies the number of packets that are sent during the current accounting session. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_TERMINATE_CAUSE
Specifies how the current accounting session was terminated. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_MULTI_SSN_ID
Value: 50
Specifies a value to enable the identification of related accounting sessions within a log file. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_ACCT_LINK_COUNT
Value: 51
Specifies the number of links if the current accounting session is using a multilink connection. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_CHAP_CHALLENGE
Value: 60
Specifies the CHAP challenge sent by the NAS to a CHAP user. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_NAS_PORT_TYPE
Specifies the type of the port through which the user is connecting, for example, asynchronous, ISDN, virtual. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_PORT_LIMIT
Specifies the number of ports the NAS should make available to the user for multilink sessions. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_LOGIN_LAT_PORT
Specifies an attribute that is not currently used for authentication on Windows. For more information, see
RFC 2865.
RADIUS_ATTRIBUTE_TUNNEL_TYPE
Specifies the tunneling protocol used. The following list lists valid tunnel types.






















































Tunnel type valueDescription
1Point-to-Point Tunneling Protocol (PPTP)
2Layer Two Forwarding (L2F)
3Layer Two Tunneling Protocol (L2TP)
4Ascend Tunnel Management Protocol (ATMP)
5Virtual Tunneling Protocol (VTP)
6IP Authentication Header in the Tunnel-mode
7IP-in-IP Encapsulation (IP-IP)
8Minimal IP-in-IP Encapsulation (MIN-IP-IP)
9IP Encapsulating Security Payload in the Tunnel-mode (ESP)
10Generic Route Encapsulation (GRE)
11Bay Dial Virtual Services (DVS)
12IP-in-IP Tunneling
RADIUS_ATTRIBUTE_TUNNEL_MEDIUM_TYPE
Specifies which transport medium to use when creating a tunnel for those protocols (such as L2TP) that can operate over multiple transports. The following list lists valid medium types.


































































Medium type valueDescription
1IPv4 (IP version 4)
2IPv6 (IP version 6)
3OSI Network Service Access Points (NSAP) Signaling Protocol (see ISO 8348 and ITU-T X.213).
4High-Level Data Link Control (HDLC) Protocol (8-bit multidrop)
5Bolt Beranek and Newman, Inc. (BBN) Report 1822
6IEEE 802 (includes all 802 media plus Ethernet "canonical format")
7E.163 Plain Old Telephone Service (POTS)
8E.164 Switched Multimegabit Data Service (SMDS), Frame Relay, Asynchronous Transfer Mode (ATM)
9F.69 (Telex)
10X.121 (X.25, Frame Relay)
11Internetwork Packet Exchange (IPX)
12AppleTalk
13Decnet IV
14Banyan Vines
15E.164 with NSAP format subaddress
RADIUS_ATTRIBUTE_TUNNEL_CLIENT_ENDPT
Specifies the address of the initiator end of the tunnel.
RADIUS_ATTRIBUTE_TUNNEL_SERVER_ENDPT
Specifies the address of the server end of the tunnel.
RADIUS_ATTRIBUTE_ACCT_TUNNEL_CONN
Specifies an identifier assigned to the tunnel
session. For more information, see
RFC 2867.
RADIUS_ATTRIBUTE_TUNNEL_PASSWORD
The password for authenticating to the remote server.
RADIUS_ATTRIBUTE_ARAP_PASSWORD
Value: 70
Specifies a password to use for AppleTalk Remote Access Protocol (ARAP) authentication. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_ARAP_FEATURES
Specifies information that an NAS should send back to the user in an ARAP "feature flags" packet. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_ARAP_ZONE_ACCESS
Specifies how to use the ARAP zone list for the user. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_ARAP_SECURITY
Specifies an ARAP security module to use during a secondary authentication phase between the NAS and the user. The value field for this type is a 32-bit integral. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_ARAP_SECURITY_DATA
Specifies the data to use with an ARAP security module. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_PASSWORD_RETRY
Specifies the number of password retry attempts to permit the user access. The value field for this type is a 32-bit integral value.
RADIUS_ATTRIBUTE_PROMPT
Value: 76
Specifies whether the NAS should echo the user response to a challenge. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_CONNECT_INFO
Specifies information about the type of connection the user is using. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_CONFIGURATION_TOKEN
Specifies user-profile information in communications between RADIUS Proxy Servers and RADIUS Proxy Clients. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_EAP_MESSAGE
Specifies that EAP information be sent directly between the user and the authentication provider. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_SIGNATURE
Value: 80
Specifies a signature to include with CHAP, EAP, or ARAP packets. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_TUNNEL_PVT_GROUP_ID
Group ID for a particular tunneled session.
RADIUS_ATTRIBUTE_TUNNEL_ASSIGNMENT_ID
Specifies a tunnel to which a session is assigned.
RADIUS_ATTRIBUTE_TUNNEL_PREFERENCE
Relative preference assigned to each tunnel when more than one set of tunneling attributes is returned to the tunnel initiator.
RADIUS_ATTRIBUTE_ARAP_CHALLENGE_RESPONSE
Specifies the response to a Apple Remote Access Protocol (ARAP) challenge. In ARAP, either the server or the client responds to challenges. For more information, see
RFC 2869.
RADIUS_ATTRIBUTE_ACCT_INTERIM_INTERVAL
Value: 85
Indicates the number of seconds between each interim update for this specific session. This value can only appear in the Access-Accept message. For more information, see
RFC 2866.
RADIUS_ATTRIBUTE_NAS_IPv6_ADDRESS
Value: 95
Specifies the IPv6 Address of the NAS that requests authentication of the user. It should be unique to the NAS within the scope of the RADIUS server. It is only used in an Access-Request packet. For more information, see the NAS-IPv6-Address section in RFC 3162.
RADIUS_ATTRIBUTE_FRAMED_INTERFACE_ID
Specifies the IPv6 interface identifier to be
configured for the user. It may be used in an Access-Accept packet.
For more information, see the Framed-Interface-Id section in RFC 3162.
RADIUS_ATTRIBUTE_FRAMED_IPv6_PREFIX
Specifies an IPv6 prefix (and corresponding route)
to be configured for the user. It may be used in an Access-Accept
packet and can appear multiple times. For more information, see the Framed-IPv6-Prefix section in RFC 3162.
RADIUS_ATTRIBUTE_LOGIN_IPv6_HOST
Specifies the system with which to connect the
user, when the ratLoginService attribute is included. It may be
used in an Access-Accept packet.
For more information, see the Login-IPv6-Host section in RFC 3162.
RADIUS_ATTRIBUTE_FRAMED_IPv6_ROUTE
Specifies routing information to be configured for
the user on the NAS. It is used in an Access-Accept packet and
can appear multiple times.
For more information, see the Framed-IPv6-Route section in RFC 3162.
RADIUS_ATTRIBUTE_FRAMED_IPv6_POOL
Value: 100
Specifies the name of an assigned pool that should
be used to assign an IPv6 prefix for the user. If a NAS does not
support multiple prefix pools, the NAS must ignore this attribute.

For more information, see the Framed-IPv6-Pool section in RFC 3162.
IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_IP_ADDRESS
Value: 0x1000
This attribute is reserved for system use.
IAS_ATTRIBUTE_SAVED_RADIUS_CALLBACK_NUMBER
This attribute is reserved for system use.
IAS_ATTRIBUTE_NP_CALLING_STATION_ID
This attribute is reserved for system use.
IAS_ATTRIBUTE_SAVED_NP_CALLING_STATION_ID
This attribute is reserved for system use.
IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_ROUTE
This attribute is reserved for system use.
IAS_ATTRIBUTE_IGNORE_USER_DIALIN_PROPERTIES
Specifies that the user's dial-in properties are ignored.
IAS_ATTRIBUTE_NP_TIME_OF_DAY
Time periods and days of week during which user is allowed to connect.
IAS_ATTRIBUTE_NP_CALLED_STATION_ID
Phone number dialed by user.
IAS_ATTRIBUTE_NP_ALLOWED_PORT_TYPES
Value: 0x1008
Port types permitted for a connection.
IAS_ATTRIBUTE_NP_AUTHENTICATION_TYPE
Authentication types permitted for a connection.
IAS_ATTRIBUTE_NP_ALLOWED_EAP_TYPE
EAP encryption modes permitted for a connection.
IAS_ATTRIBUTE_SHARED_SECRET
This attribute is reserved for system use.
IAS_ATTRIBUTE_CLIENT_IP_ADDRESS
This attribute is reserved for system use.
IAS_ATTRIBUTE_CLIENT_PACKET_HEADER
This attribute is reserved for system use.
IAS_ATTRIBUTE_TOKEN_GROUPS
This attribute is reserved for system use.
IAS_ATTRIBUTE_ALLOW_DIALIN
Specifies whether dial-in access is available for a given user.
IAS_ATTRIBUTE_REQUEST_ID
Value: 0x1010
This attribute is reserved for system use.
IAS_ATTRIBUTE_MANIPULATION_TARGET
The target data to which an attribute manipulation rule is applied. Attribute manipulation was previously known as 'realms processing'. See the online help for Internet Authentication Service for more information on attribute manipulation.
IAS_ATTRIBUTE_MANIPULATION_RULE
The manipulation rule to apply to the data specified by the Manipulation-Target attribute. See the online help for Internet Authentication Service for more information on attribute manipulation.
IAS_ATTRIBUTE_ORIGINAL_USER_NAME
This attribute is reserved for system use.
IAS_ATTRIBUTE_CLIENT_VENDOR_TYPE
This attribute is reserved for system use.
IAS_ATTRIBUTE_CLIENT_UDP_PORT
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP_CHALLENGE
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP_RESPONSE
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP_DOMAIN
Value: 0x1018
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP_ERROR
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP_CPW1
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP_CPW2
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP_LM_ENC_PW
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP_NT_ENC_PW
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP_MPPE_KEYS
This attribute is reserved for system use.
IAS_ATTRIBUTE_AUTHENTICATION_TYPE
This attribute is reserved for system use.
IAS_ATTRIBUTE_CLIENT_NAME
Value: 0x1020
This attribute is reserved for system use.
IAS_ATTRIBUTE_NT4_ACCOUNT_NAME
This attribute is reserved for system use.
IAS_ATTRIBUTE_FULLY_QUALIFIED_USER_NAME
This attribute is reserved for system use.
IAS_ATTRIBUTE_NTGROUPS
Specifies groups used for the policy conditions.
IAS_ATTRIBUTE_EAP_FRIENDLY_NAME
This attribute is reserved for system use.
IAS_ATTRIBUTE_AUTH_PROVIDER_TYPE
The type of authentication provider to use.
MS_ATTRIBUTE_ACCT_AUTH_TYPE
This attribute is reserved for system use.
MS_ATTRIBUTE_ACCT_EAP_TYPE
This attribute is reserved for system use.
IAS_ATTRIBUTE_PACKET_TYPE
Value: 0x1028
This attribute is reserved for system use.
IAS_ATTRIBUTE_AUTH_PROVIDER_NAME
The name of the RADIUS server or server group that provides authentication.
IAS_ATTRIBUTE_ACCT_PROVIDER_TYPE
The type of accounting provider to use.
IAS_ATTRIBUTE_ACCT_PROVIDER_NAME
The name of the RADIUS server that provides accounting.
MS_ATTRIBUTE_MPPE_SEND_KEY
This attribute is reserved for system use.
MS_ATTRIBUTE_MPPE_RECV_KEY
This attribute is reserved for system use.
IAS_ATTRIBUTE_REASON_CODE
Specifies an MS-CHAP reason-for-failure code. This attribute is returned in the Failure packet Message field. For more information, see Request for Comments (RFC)
2433.
MS_ATTRIBUTE_FILTER
See Request for Comments (RFC)
2548, Microsoft Vendor-specific RADIUS Attributes.
MS_ATTRIBUTE_CHAP2_RESPONSE
Value: 0x1030
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP2_SUCCESS
This attribute is reserved for system use.
MS_ATTRIBUTE_CHAP2_CPW
This attribute is reserved for system use.
MS_ATTRIBUTE_RAS_VENDOR
See Request for Comments (RFC)
2548, Microsoft Vendor-specific RADIUS Attributes.
MS_ATTRIBUTE_RAS_VERSION
See Request for Comments (RFC)
2548, Microsoft Vendor-specific RADIUS Attributes.
IAS_ATTRIBUTE_NP_NAME
This attribute is reserved for system use.
MS_ATTRIBUTE_PRIMARY_DNS_SERVER
See Request for Comments (RFC)
2548, Microsoft Vendor-specific RADIUS Attributes.
MS_ATTRIBUTE_SECONDARY_DNS_SERVER
See Request for Comments (RFC)
2548, Microsoft Vendor-specific RADIUS Attributes.
MS_ATTRIBUTE_PRIMARY_NBNS_SERVER
Value: 0x1038
See Request for Comments (RFC)
2548, Microsoft Vendor-specific RADIUS Attributes.
MS_ATTRIBUTE_SECONDARY_NBNS_SERVER
See Request for Comments (RFC)
2548, Microsoft Vendor-specific RADIUS Attributes.
IAS_ATTRIBUTE_PROXY_POLICY_NAME
This attribute is reserved for system use.
IAS_ATTRIBUTE_PROVIDER_TYPE
This attribute is reserved for system use.
IAS_ATTRIBUTE_PROVIDER_NAME
This attribute is reserved for system use.
IAS_ATTRIBUTE_REMOTE_SERVER_ADDRESS
This attribute is reserved for system use.
IAS_ATTRIBUTE_GENERATE_CLASS_ATTRIBUTE
Specifies whether NPS automatically generates the class attribute. NPS automatically generates the class attribute by default.
MS_ATTRIBUTE_RAS_CLIENT_NAME
Specifies the name of the client generating a request.
MS_ATTRIBUTE_RAS_CLIENT_VERSION
Value: 0x1040
Specifies the version of the client generating a request.
IAS_ATTRIBUTE_ALLOWED_CERTIFICATE_EKU
Specifies the certificate purpose or usage object identifiers (OIDs), in dotted decimal notation, that are allowed when performing certificate-based authentication with EAP-TLS.
IAS_ATTRIBUTE_EXTENSION_STATE
This attribute is reserved for system use.
IAS_ATTRIBUTE_GENERATE_SESSION_TIMEOUT
Specifies whether NPS automatically generates the session timeout based on user account expiration and time-of-day restrictions. NPS does not automatically generate the session timeout by default.
IAS_ATTRIBUTE_SESSION_TIMEOUT
This attribute is reserved for system use.
MS_ATTRIBUTE_QUARANTINE_IPFILTER
Specifies the IP traffic filter used by the Routing and Remote Access service when the connection is in a restricted state.
MS_ATTRIBUTE_QUARANTINE_SESSION_TIMEOUT
Specifies the time (in seconds) that the connection can remain in a restricted state before being disconnected.
MS_ATTRIBUTE_USER_SECURITY_IDENTITY
Specifies the SID of the user requesting access.
IAS_ATTRIBUTE_REMOTE_RADIUS_TO_WINDOWS_USER_MAPPING
Value: 0x1048
Specifies that Windows authorization is enabled for users authenticated by the remote RADIUS server for example, allows use with Passport user mapping.
IAS_ATTRIBUTE_PASSPORT_USER_MAPPING_UPN_SUFFIX
Specifies the UPN suffix of the Passport to Windows user mapping.
IAS_ATTRIBUTE_TUNNEL_TAG
Used to set the tag byte for any tunnel attributes in the profile. If this is not set, the default is zero.
IAS_ATTRIBUTE_NP_PEAPUPFRONT_ENABLED
This attribute is reserved for system use.
IAS_ATTRIBUTE_CERTIFICATE_EKU
Value: 8097
This attribute is reserved for system use.
IAS_ATTRIBUTE_EAP_CONFIG
This attribute is reserved for system use.
IAS_ATTRIBUTE_PEAP_EMBEDDED_EAP_TYPEID
This attribute is reserved for system use.
IAS_ATTRIBUTE_PEAP_FAST_ROAMED_SESSION
Value: 8100
This attribute is reserved for system use.
IAS_ATTRIBUTE_EAP_TYPEID
This attribute is reserved for system use.
MS_ATTRIBUTE_EAP_TLV
This attribute is reserved for system use.
IAS_ATTRIBUTE_REJECT_REASON_CODE
This attribute is reserved for system use.
IAS_ATTRIBUTE_PROXY_EAP_CONFIG
This attribute is reserved for system use.
IAS_ATTRIBUTE_EAP_SESSION
This attribute is reserved for system use.
IAS_ATTRIBUTE_IS_REPLAY
This attribute is reserved for system use.
IAS_ATTRIBUTE_CLEAR_TEXT_PASSWORD
This attribute is reserved for system use.
MS_ATTRIBUTE_IDENTITY_TYPE
Specifies the type of identity check to perform.
MS_ATTRIBUTE_SERVICE_CLASS
Specifies which group of DHCP scopes correspond to the client requesting access.
MS_ATTRIBUTE_QUARANTINE_USER_CLASS
Value: 8110
Vendor-specific attribute used to carry the name of a special DHCP user class, as specified in RFC 3004, called Network Access Protection (NAP) user class.
MS_ATTRIBUTE_QUARANTINE_STATE
Specifies the target quarantine state of the client.
IAS_ATTRIBUTE_OVERRIDE_RAP_AUTH
This attribute is reserved for system use.
IAS_ATTRIBUTE_PEAP_CHANNEL_UP
This attribute is reserved for system use.
IAS_ATTRIBUTE_NAME_MAPPED
This attribute is reserved for system use.
IAS_ATTRIBUTE_POLICY_ENFORCED
This attribute is reserved for system use.
IAS_ATTRIBUTE_MACHINE_NTGROUPS
This attribute is reserved for system use.
IAS_ATTRIBUTE_USER_NTGROUPS
This attribute is reserved for system use.
IAS_ATTRIBUTE_MACHINE_TOKEN_GROUPS
This attribute is reserved for system use.
IAS_ATTRIBUTE_USER_TOKEN_GROUPS
This attribute is reserved for system use.
MS_ATTRIBUTE_QUARANTINE_GRACE_TIME
Value: 8120
Specifies the amount of time a host has to become conformant with network policy.
IAS_ATTRIBUTE_QUARANTINE_URL
This attribute is reserved for system
use.
IAS_ATTRIBUTE_QUARANTINE_FIXUP_SERVERS
This attribute is reserved for system use.
MS_ATTRIBUTE_NOT_QUARANTINE_CAPABLE
Vendor-specific attribute that specifies if the client is capable of reporting its state to the network access server (NAS). It must be one of the following values.














ValueMeaning
0 The client sent a Statement of Health (SoH).
1 The client did not send an SoH.
IAS_ATTRIBUTE_QUARANTINE_SYSTEM_HEALTH_RESULT
This attribute is reserved for system use.
IAS_ATTRIBUTE_QUARANTINE_SYSTEM_HEALTH_VALIDATORS
This attribute is reserved for system use.
IAS_ATTRIBUTE_MACHINE_NAME
This attribute is reserved for system use.
IAS_ATTRIBUTE_NT4_MACHINE_NAME
This attribute is reserved for system use.
IAS_ATTRIBUTE_QUARANTINE_SESSION_HANDLE
This attribute is reserved for system use.
IAS_ATTRIBUTE_FULLY_QUALIFIED_MACHINE_NAME
This attribute is reserved for system use.
IAS_ATTRIBUTE_QUARANTINE_FIXUP_SERVERS_CONFIGURATION
Value: 8130
This attribute is reserved for system use.
IAS_ATTRIBUTE_CLIENT_QUARANTINE_COMPATIBLE
This attribute is reserved for system use.
MS_ATTRIBUTE_NETWORK_ACCESS_SERVER_TYPE
Specifies the access type of a network access server (NAS). A NAS may send this attribute to a RADIUS server to indicate the type of this NAS in an Access-Request message.
IAS_ATTRIBUTE_QUARANTINE_SESSION_ID
This attribute is reserved for system use.
MS_ATTRIBUTE_AFW_QUARANTINE_ZONE
Vendor-specific attribute used as a hint for dynamic selection of a preconfigured Internet Protocol security (IPsec) policy by the client requesting access.
MS_ATTRIBUTE_AFW_PROTECTION_LEVEL
Vendor-specific attribute used as a hint for dynamic selection of a preconfigured IPsec policy by the client requesting access.
IAS_ATTRIBUTE_QUARANTINE_UPDATE_NON_COMPLIANT
This attribute is reserved for system use.
IAS_ATTRIBUTE_REQUEST_START_TIME
This attribute is reserved for system use.
MS_ATTRIBUTE_MACHINE_NAME
Vendor-specific attribute used to communicate the machine name of the client requesting network access.
IAS_ATTRIBUTE_CLIENT_IPv6_ADDRESS
This attribute is reserved for system use.
IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_INTERFACE_ID
Value: 8140
This attribute is reserved for system use.
IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_IPv6_PREFIX
IAS_ATTRIBUTE_SAVED_RADIUS_FRAMED_IPv6_ROUTE
MS_ATTRIBUTE_QUARANTINE_GRACE_TIME_CONFIGURATION
MS_ATTRIBUTE_IPv6_FILTER
Value: 8144
Vendor-specific attribute used to limit the inbound and/or outbound access of the endpoint client.
MS_ATTRIBUTE_IPV4_REMEDIATION_SERVERS
Specifies a list of servers that should be reachable by a quarantined client so that it may remediate itself.
MS_ATTRIBUTE_IPV6_REMEDIATION_SERVERS
Specifies a list of servers that should be reachable by a quarantined client so that it may remediate itself.
IAS_ATTRIBUTE_PROXY_RETRY_COUNT
This attribute is reserved for system use.
IAS_ATTRIBUTE_MACHINE_INVENTORY
This attribute is reserved for system use.
IAS_ATTRIBUTE_ABSOLUTE_TIME
This attribute is reserved for system use.
MS_ATTRIBUTE_QUARANTINE_SOH
Value: 8150
Vendor-specific attribute used only to carry Statement of Health (SoH) information when EAP is not used. A RADIUS server may send it to a network access server (NAS) in an Access-Accept message.
IAS_ATTRIBUTE_EAP_TYPES_CONFIGURED_IN_PROXYPOLICY
This attribute is reserved for system use.
MS_ATTRIBUTE_HCAP_LOCATION_GROUP_NAME
Vendor-specific attribute specifying the location group name for the HCAP entity.
MS_ATTRIBUTE_EXTENDED_QUARANTINE_STATE
Specifies the additional Quarantine state information for a user requesting access to this NAS.
IAS_ATTRIBUTE_SOH_CARRIER_EAPTLV
This attribute is reserved for system use.
MS_ATTRIBUTE_HCAP_USER_GROUPS
Value: 8155
An NAS may use this attribute to pass the group name of the user requesting network access to a RADIUS server, which may then use this information to make authentication or authorization decisions.
IAS_ATTRIBUTE_SAVED_MACHINE_HEALTHCHECK_ONLY
This attribute is reserved for system use.
IAS_ATTRIBUTE_POLICY_EVALUATED_SHV
Multiple instances of this attribute
can be present at one time.
MS_ATTRIBUTE_RAS_CORRELATION_ID
TBD
MS_ATTRIBUTE_HCAP_USER_NAME
An NAS may use this attribute to pass the name of the user requesting network access to a RADIUS server, which may then use this information to make authentication or authorization decisions.
IAS_ATTRIBUTE_NT4_HCAP_ACCOUNT_NAME
Value: 8160
This attribute is reserved for system use.
IAS_ATTRIBUTE_USER_TOKEN_SID
SID for IAS_ATTRIBUTE_NT4_ACCOUNT_NAME or IAS_ATTRIBUTE_NT4_HCAP_ACCOUNT_NAME
regardless of whether the later is a user account or a machine account.
IAS_ATTRIBUTE_MACHINE_TOKEN_SID
SID for IAS_ATTRIBUTE_NT4_MACHINE_NAME.
IAS_ATTRIBUTE_MACHINE_VALIDATED
TBD
MS_ATTRIBUTE_USER_IPv4_ADDRESS
Specifies the IPv4 address of the user.
MS_ATTRIBUTE_USER_IPv6_ADDRESS
Value: 8165
Specifies the IPv4 address of the user.
MS_ATTRIBUTE_TSG_DEVICE_REDIRECTION
Vendor-specific attribute for TS Gateway Device Redirection flags.
IAS_ATTRIBUTE_ACCEPT_REASON_CODE
TBD
IAS_ATTRIBUTE_LOGGING_RESULT
TBD
IAS_ATTRIBUTE_SERVER_IP_ADDRESS
TBD
IAS_ATTRIBUTE_SERVER_IPv6_ADDRESS
TBD
IAS_ATTRIBUTE_RADIUS_USERNAME_ENCODING_ASCII
TBD
MS_ATTRIBUTE_RAS_ROUTING_DOMAIN_ID
Value: 8172
IAS_ATTRIBUTE_CERTIFICATE_THUMBPRINT
Value: 8250
RAS_ATTRIBUTE_ENCRYPTION_TYPE
Specifies the encryption type of the user's connection.
RAS_ATTRIBUTE_ENCRYPTION_POLICY
Specifies the whether encryption is Allowed, Required, or None (disallowed). For more information, see
RFC 2548.
RAS_ATTRIBUTE_BAP_REQUIRED
Specifies whether bandwidth allocation protocol (BAP) is required.
RAS_ATTRIBUTE_BAP_LINE_DOWN_TIME
Time in seconds for the capacity utilization calculation.
RAS_ATTRIBUTE_BAP_LINE_DOWN_LIMIT
Percent of capacity utilized at which to bring a line down for this user.

Requirements

Requirement Value
Minimum supported client None supported
Minimum supported server Windows Server 2008
Header sdoias.h

See also

Attributes

ISdoDictionaryOld

  • Last updated on