Partager via

Exemple de gestionnaire d’événements (documentation du SDK POS pour .NET v1.14)

Cet exemple montre comment les applications peuvent inscrire des gestionnaires pour l’un des cinq types d’événements pris en charge par Microsoft Point of Service pour .NET (POS pour .NET) :

  • DataEvent
  • ErrorEvent
  • StatusUpdateEvent
  • OutputCompleteEvent
  • DirectIOEvent

Il montre également comment une application gère les demandes de sortie asynchrones sur un appareil PosPrinter.

Pour créer l'exemple de projet

  1. Compilez et installez l’exemple de code de l’objet de service issu de Exemple de sortie asynchrone.

  2. Créez un projet d’application Windows Forms dans Microsoft Visual Studio 2013.

  3. La section de code ci-dessous comprend deux fichiers, AsyncApp.cs et AsyncApp.Designer.cs.

  4. Dans le projet nouvellement créé, remplacez Form1.cs par AsyncApp.cs, et Form1.Designer.cs par AsyncApp.Designer.cs.

  5. Si elle n’existe pas déjà, ajoutez une référence d’assembly à Microsoft.PointOfService.dll. Dans une installation standard, vous trouverez ce fichier sous Program Files (x86)\Microsoft Point Of Service\SDK.

  6. Compilez et exécutez.

Exécution de l'exemple

  1. Cet exemple affiche une interface graphique utilisateur qui permet à l’utilisateur d’envoyer des demandes d’impression asynchrones et synchrones à l’objet de service Exemple de sortie asynchrone.

  2. L’objet de service attend plusieurs secondes avant d’être retourné par une requête, qu’elle soit synchrone ou asynchrone.

  3. L’interface utilisateur affiche l’état de chaque requête dans la zone de texte.

Exemple

Cet exemple de code illustre plusieurs points clés :

  • Utilisation d’un événement OutputCompleteEvent pour informer l’application que l’objet de service a répondu à une demande de sortie.
  • Inscription de gestionnaires d’événements, y compris l’utilisation de la réflexion.
  • Utilisation de PosExplorer pour rechercher des objets de service spécifiques.

Pour montrer comment la réflexion peut être utilisée afin de découvrir quels événements sont disponibles sur un objet donné, ce code utilise l’objet PosCommon retourné par CreateInstance(DeviceInfo), sans le caster au préalable sur un PosPrinter. Dans la plupart des cas, une application n’a pas besoin d’être générique de cette façon et l’objet est donc casté comme il convient.

// ASYNCAPP.CS
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Threading;
using System.Windows.Forms;
using System.Reflection;
using Microsoft.PointOfService;

namespace AsyncOutputApp
{
    public partial class AsyncApp : Form
    {
        PosCommon posCommon;
        PosExplorer posExplorer;

        public AsyncApp()
        {
            InitializeComponent();

            btnPrintAsync.Enabled = true;
            btnPrintSync.Enabled = true;

            posExplorer = new PosExplorer(this);
            posCommon = null;

            string SOName = "AsyncOutputPrinter";

            try
            {
                OpenDevice(SOName);
                SetupEvents();
            }
            catch
            {
                MessageBox.Show("The Service Object '" +
                        SOName + "' failed to load",
                        "Service Object Error",
                        MessageBoxButtons.OK,
                        MessageBoxIcon.Exclamation);

                btnPrintAsync.Enabled = false;
                btnPrintSync.Enabled = false;
            }
        }

        private void OpenDevice(string SOName)
        {
            string str = txtPrintResults.Text;
            DeviceInfo device = null;

            txtPrintResults.Clear();

            {
                // Retrieve the list of PosPrinter Service Objects.
                DeviceCollection devices =
                        posExplorer.GetDevices(
                        DeviceType.PosPrinter);

                // Iterate through the list looking for the one
                // needed for this sample.
                foreach(DeviceInfo d in devices)
                {
                    if(d.ServiceObjectName == SOName)
                    {
                        device = d;
                        break;
                    }
                }

                if (device == null)
                {
                    throw new Exception("Service Object not found");
                }

                txtPrintResults.Text = "Opening device: " +
                        device.ServiceObjectName + ", type: " +
                        device.Type + "\r\n";

                posCommon =
                        (PosCommon)posExplorer.CreateInstance(device);

                posCommon.Open();
                posCommon.Claim(0);
                posCommon.DeviceEnabled = true;
            }
        }

        // When this button is pressed, AsyncMode is turned off,
        // and the application waits for each print request
        // to complete before regaining control.
        private void btnPrintSync_Click(object sender, EventArgs e)
        {
            PosPrinter posPrinter = posCommon as PosPrinter;
            posPrinter.AsyncMode = false;

            txtPrintResults.AppendText(
                        "Printing will take place " +
                        "synchronously.\r\n");

            StartPrinting();
        }

        // When this button is pressed, AsyncMode is turned on. Print
        // requests will be queued and delivered on a
        // first-in-first-out basis.
        private void btnPrintAsync_Click(object sender, EventArgs e)
        {
            PosPrinter posPrinter = posCommon as PosPrinter;
            posPrinter.AsyncMode = true;

            txtPrintResults.AppendText(
                        "Printing will take place " +
                        "asynchronously.\r\n");

            StartPrinting();
        }

        private void StartPrinting()
        {
            PosPrinter posPrinter = posCommon as PosPrinter;

            txtPrintResults.AppendText(
                        "Calling PrintNormal to start " +
                        "printing...\r\n");

            // Notice that calling PrintNormal() here may not result
            // in a print request being sent immediately to the
            // printer. In asynchronous mode, the requested is
            // placed in a first-in-first-out queue managed by
            // POS for .NET.
            try
            {
                posPrinter.PrintNormal(
                            PrinterStation.Receipt,
                            "This is do-nothing print data");
            }
            catch (PosControlException e)
            {
                txtPrintResults.AppendText(
                            "PrintNormal threw a " +
                            "PosControlException! Description: " +
                            e.Message + "\r\n");

                return;
            }

            // When data is sent to an output device, POS for .NET
            // updates the OutputId property in the target object.
            // When an OutputCompleteEvent is sent to the app,
            // the OutputCompleteEventArgs will contain this id.
            Int32 id = posPrinter.OutputId;

            txtPrintResults.AppendText(
                        "PrintNormal has returned! OutputID = " +
                        id + "\r\n");
        }

        // Visual Studio-generated code.
        private void AsyncApp_Load(object sender, EventArgs e)
        {
        }

        #region Event Registration
        private void SetupEvents()
        {
            // All PosCommon objects support StatusUpdateEvent and
            // DirectIOEvent events, so simply register a handler
            // for those events.
            posCommon.StatusUpdateEvent +=
                        new StatusUpdateEventHandler(
                        co_OnStatusUpdateEvent);

            posCommon.DirectIOEvent +=
                        new DirectIOEventHandler(
                        co_OnDirectIOEvent);

            // In addition to the events common to all devices
            // (StatusUpdateEvent and DirectIOEvent), a device
            // type may also support DataEvent, ErrorEvent, or
            // OutputCompleteEvent events.
            //
            // In this example, the following code uses reflection
            // to determine which events are supported by this
            // object (posCommon).
            //
            // However, in the general case, an application will know
            // what type of device was returned when PosExplorer
            // CreateInstance() was called;therefore will not
            // need to use reflection, but can instead register
            // event handlers using the mechanism used for
            // StatusUpdateEvent and DirectIOEvent events above.
            EventInfo dataEvent =
                        posCommon.GetType().GetEvent(
                        "DataEvent");
            if (dataEvent != null)
            {
                dataEvent.AddEventHandler(posCommon,
                        new DataEventHandler(
                        co_OnDataEvent));

                txtPrintResults.AppendText("Registering Event: " +
                        "DataEvent\r\n");
            }

            EventInfo errorEvent =
                        posCommon.GetType().GetEvent(
                        "ErrorEvent");
            if (errorEvent != null)
            {
                errorEvent.AddEventHandler(posCommon,
                        new DeviceErrorEventHandler(
                        co_OnErrorEvent));

                txtPrintResults.AppendText("Registering Event: " +
                        "ErrorEvent\r\n");
            }

            EventInfo outputCompleteEvent =
                        posCommon.GetType().GetEvent(
                        "OutputCompleteEvent");
            if (outputCompleteEvent != null)
            {
                outputCompleteEvent.AddEventHandler(
                        posCommon, new OutputCompleteEventHandler(
                        co_OnOutputCompleteEvent));

                txtPrintResults.AppendText("Registering Event: " +
                        "OutputCompleteEvent\r\n");
            }
        }
        #endregion Event Registration

        #region Event Handlers
        private void co_OnDataEvent(
                        object obj,
                        DataEventArgs d)
        {
            txtPrintResults.AppendText(d.ToString() + "\r\n");
        }

        private void co_OnStatusUpdateEvent(
                        object source,
                        StatusUpdateEventArgs d)
        {
            txtPrintResults.AppendText(d.ToString() + "\r\n");
        }

        private void co_OnDirectIOEvent(
                        object source,
                        DirectIOEventArgs d)
        {
            txtPrintResults.AppendText(d.ToString() + "\r\n");
        }

        private void co_OnErrorEvent(
                        object source,
                        DeviceErrorEventArgs d)
        {
            string str = d.ToString();

            MessageBox.Show(d.ToString(),
                        "OnErrorEvent called",
                        MessageBoxButtons.OK,
                        MessageBoxIcon.Error);

            txtPrintResults.AppendText(d.ToString() + "\r\n");
        }

        private void co_OnOutputCompleteEvent(
                        object source,
                        OutputCompleteEventArgs d)
        {
            txtPrintResults.AppendText(d.ToString() + "\r\n");
        }
        #endregion Event Handlers
    }
}

// ASYNCAPP.DESIGNER.CS
namespace AsyncOutputApp
{
    partial class AsyncApp
    {
        /// <summary>
        /// Required designer variable.
        /// </summary>
        private System.ComponentModel.IContainer components = null;

        /// <summary>
        /// Clean up any resources being used.
        /// </summary>
        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
        protected override void Dispose(bool disposing)
        {
            if (disposing && (components != null))
            {
                components.Dispose();
            }
            base.Dispose(disposing);
        }

        #region Windows Form Designer generated code

        /// <summary>
        /// Required method for Designer support - do not modify
        /// the contents of this method with the code editor.
        /// </summary>
        private void InitializeComponent()
        {
            this.txtPrintResults = new System.Windows.Forms.TextBox();
            this.btnPrintSync = new System.Windows.Forms.Button();
            this.btnPrintAsync = new System.Windows.Forms.Button();
            this.SuspendLayout();
            //
            // txtPrintResults
            //
            this.txtPrintResults.BackColor = System.Drawing.SystemColors.Window;
            this.txtPrintResults.Location = new System.Drawing.Point(12, 119);
            this.txtPrintResults.Multiline = true;
            this.txtPrintResults.Name = "txtPrintResults";
            this.txtPrintResults.ReadOnly = true;
            this.txtPrintResults.ScrollBars = System.Windows.Forms.ScrollBars.Vertical;
            this.txtPrintResults.Size = new System.Drawing.Size(650, 200);
            this.txtPrintResults.TabIndex = 3;
            //
            // btnPrintSync
            //
            this.btnPrintSync.Location = new System.Drawing.Point(12, 12);
            this.btnPrintSync.Name = "btnPrintSync";
            this.btnPrintSync.Size = new System.Drawing.Size(132, 39);
            this.btnPrintSync.TabIndex = 1;
            this.btnPrintSync.Text = "Print Synchronous";
            this.btnPrintSync.UseVisualStyleBackColor = true;
            this.btnPrintSync.Click += new System.EventHandler(this.btnPrintSync_Click);
            //
            // btnPrintAsync
            //
            this.btnPrintAsync.Location = new System.Drawing.Point(12, 57);
            this.btnPrintAsync.Name = "btnPrintAsync";
            this.btnPrintAsync.Size = new System.Drawing.Size(132, 39);
            this.btnPrintAsync.TabIndex = 2;
            this.btnPrintAsync.Text = "Print Asynchronously";
            this.btnPrintAsync.UseVisualStyleBackColor = true;
            this.btnPrintAsync.Click += new System.EventHandler(this.btnPrintAsync_Click);
            //
            // AsyncApp
            //
            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
            this.ClientSize = new System.Drawing.Size(685, 331);
            this.Controls.Add(this.btnPrintAsync);
            this.Controls.Add(this.btnPrintSync);
            this.Controls.Add(this.txtPrintResults);
            this.Name = "AsyncApp";
            this.Text = "Form1";
            this.Load += new System.EventHandler(this.AsyncApp_Load);
            this.ResumeLayout(false);
            this.PerformLayout();

        }

        #endregion

        private System.Windows.Forms.TextBox txtPrintResults;
        private System.Windows.Forms.Button btnPrintSync;
        private System.Windows.Forms.Button btnPrintAsync;
    }
}

Le programme doit afficher le texte suivant si vous appuyez d’abord sur Print Synchronous (Impression synchrone), puis sur le bouton Print Asynchronous (Impression asynchrone).

Ouverture de l’appareil : AsyncOutputPrinter, type : PosPrinterRegistering Événement : ErrorEventRegistering Événement : OutputCompleteEventPrinting aura lieu de façon synchrone. Appel de PrintNormal pour commencer l’impression... PrintNormal est retourné ! OutputID = 0Printing aura lieu de façon asynchrone. Appel de PrintNormal pour commencer l’impression... PrintNormal est retourné ! OutputID = 1Microsoft.PointOfService.OutputCompleteEventArgs, Horodatage : 11:35:39 AM, EventId : 1, OutputId : 1.

Voir aussi

Tâches

Concepts

Autres ressources

  • Last updated on