Remarque
L’accès à cette page nécessite une autorisation. Vous pouvez essayer de vous connecter ou de modifier des répertoires.
L’accès à cette page nécessite une autorisation. Vous pouvez essayer de modifier des répertoires.
I/O control codes are contained in IRP_MJ_DEVICE_CONTROL and IRP_MJ_INTERNAL_DEVICE_CONTROL requests. The I/O manager creates these requests as a result of calls to DeviceIoControl and IoBuildDeviceIoControlRequest.
Because DeviceIoControl and IoBuildDeviceIoControlRequest accept both an input buffer and an output buffer as arguments, all IRP_MJ_DEVICE_CONTROL and IRP_MJ_INTERNAL_DEVICE_CONTROL requests supply both an input buffer and an output buffer. La façon dont le système décrit ces mémoires tampons dépend du type de transfert de données. The transfer type is specified by the TransferType value in the CTL_CODE macro that creates IOCTL code values.
The system describes buffers for each TransferType value as follows.
METHOD_BUFFERED
For this transfer type, IRPs supply a pointer to a buffer at Irp->AssociatedIrp.SystemBuffer. This buffer represents both the input buffer and the output buffer that are specified in calls to DeviceIoControl and IoBuildDeviceIoControlRequest. Le pilote transfère les données hors de, puis vers cette mémoire tampon.
For input data, the buffer size is specified by Parameters.DeviceIoControl.InputBufferLength in the driver's IO_STACK_LOCATION structure. For output data, the buffer size is specified by Parameters.DeviceIoControl.OutputBufferLength in the driver's IO_STACK_LOCATION structure.
La taille de l’espace alloué par le système pour la mémoire tampon d’entrée/sortie unique est la plus grande des deux valeurs de longueur.
METHOD_IN_DIRECT ou METHOD_OUT_DIRECT
For these transfer types, IRPs supply a pointer to a buffer at Irp->AssociatedIrp.SystemBuffer. This represents the first buffer that is specified in calls to DeviceIoControl and IoBuildDeviceIoControlRequest. The buffer size is specified by Parameters.DeviceIoControl.InputBufferLength in the driver's IO_STACK_LOCATION structure.
For these transfer types, IRPs also supply a pointer to an MDL at Irp->MdlAddress. This represents the second buffer that is specified in calls to DeviceIoControl and IoBuildDeviceIoControlRequest. Cette mémoire tampon peut être utilisée en tant que mémoire tampon d’entrée ou mémoire tampon de sortie, comme suit :
METHOD_IN_DIRECT est spécifié si le pilote qui gère l’IRP reçoit des données dans la mémoire tampon lorsqu’il est appelé. Le MDL décrit une mémoire tampon d’entrée et la spécification de METHOD_IN_DIRECT garantit que le thread en cours d’exécution dispose d’un accès en lecture à la mémoire tampon.
METHOD_OUT_DIRECT est spécifié si le pilote qui gère l'IRP écrit des données dans le buffer avant de terminer l'IRP. Le MDL décrit une mémoire tampon de sortie, et la spécification METHOD_OUT_DIRECT garantit que le thread en cours d'exécution dispose d'un accès en écriture à la mémoire tampon.
For both of these transfer types, Parameters.DeviceIoControl.OutputBufferLength specifies the size of the buffer that is described by the MDL.
METHOD_NEITHER
Le gestionnaire d’E/S ne fournit aucune mémoire tampon système ni MDL. The IRP supplies the user-mode virtual addresses of the input and output buffers that were specified to DeviceIoControl or IoBuildDeviceIoControlRequest, without validating or mapping them.
The input buffer's address is supplied by Parameters.DeviceIoControl.Type3InputBuffer in the driver's IO_STACK_LOCATION structure, and the output buffer's address is specified by Irp->UserBuffer.
Buffer sizes are supplied by Parameters.DeviceIoControl.InputBufferLength and Parameters.DeviceIoControl.OutputBufferLength in the driver's IO_STACK_LOCATION structure.
For more information about the CTL_CODE macro and the transfer types listed above, see Defining I/O Control Codes.