次のセクションには、新しい API サーフェスを使用する方法を示すサンプル コードが含まれています。 各セクションでは、サンプル コードのシナリオについて説明します。
サンプル 1
IHV/OEM が提供するデバイス MFT では、基になるセンサーと ISP によってサポートされる一連のカメラ プロファイルを提供する必要があります。 これは、Device MFT の IMFDeviceTransform::InitializeTransform() メソッドの間に発行されます。
指定されたカメラ プロファイルは、接続された変換の IMFAttributes ストアに設定する必要があります (これは、パイプラインが完全に構築された後のパイプライン クエリのストアです)。
このサンプルは、IHV がプロファイルを有効にした単一の参照ドライバー パッケージを出荷する場合に一般的ですが、OEM はカメラ モジュールを異なるセンサー モジュールとペアリングすることを選択できます。 このような場合、センサーは同じ機能を持たない可能性があるため、プロファイルのランタイム更新が必要です。 これは DMFT によって行われます。
IFACEMETHODIMP
SampleDMFT::InitializeTransform(
_In_ IMFAttributes *pAttributes
)
{
ComPtr<IMFTransform> spTransform;
ComPtr<IMFAttributes> spAttributes;
ComPtr<IMFSensorProfileCollection> spProfileCollection;
ComPtr<IMFSensorProfile> spProfile;
if (nullptr == pAttributes)
{
return E_INVALIDARG;
}
// Get the connected KSCONTROL interface, this is the
// IMFTransform of the up stream transform--which will
// be the devproxy if only one DMFT is present, or
// will be forwarded by the platform DMFT if that is
// in between the IHV/OEM DMFT and devproxy.
// In either case, the IHV/OEM DMFT won't need to know
// the topology.
RETURN_IF_FAILED (pAttributes->GetUnknown(MF_DEVICEMFT_CONNECTED_FILTER_KSCONTROL,
IID_PPV_ARGS(&spTransform)));
RETURN_IF_FAILED (spTransform->GetAttributes(&spAttributes));
// Create an empty profile collection...
RETURN_IF_FAILED (MFCreateSensorProfileCollection(&spProfileCollection));
// In this example:
// Pin0 - Preview pin.
// Pin1 - Capture/Record pin.
// Pin2 - Photo pin.
// Pin3 - IR pin.
//
// Legacy profile is mandatory. This is to ensure non-profile
// aware applications can still function, but with degraded
// feature sets.
RETURN_IF_FAILED (MFCreateSensorProfile(KSCAMERAPROFILE_Legacy, 0, nullptr,
spProfile.ReleaseAndGetAddressOf()));
RETURN_IF_FAILED (spProfile->AddProfileFilter(0, L"((RES==;FRT<=30,1;SUT==))"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(1, L"((RES==;FRT<=30,1;SUT==))"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(2, L"((RES==;FRT<=30,1;SUT==))"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(3, L"((RES==;FRT<=30,1;SUT==))"));
RETURN_IF_FAILED (spProfileCollection->AddProfile(spProfile));
// High Frame Rate profile will only allow preview & record/capture pin.
RETURN_IF_FAILED (MFCreateSensorProfile(KSCAMERAPROFILE_HighFrameRate, 0, nullptr,
spProfile.ReleaseAndGetAddressOf()));
RETURN_IF_FAILED (spProfile->AddProfileFilter(0, L"((RES==;FRT==;SUT==))"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(1, L"((RES==;FRT>=60,1;SUT==))"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(2, L"(!)"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(3, L"(!)"));
RETURN_IF_FAILED (spProfileCollection->AddProfile(spProfile));
// HighQualityPhoto profile will only allow preview and photo pin.
RETURN_IF_FAILED (MFCreateSensorProfile(KSCAMERAPROFILE_HighQualityPhoto, 0, nullptr,
spProfile.ReleaseAndGetAddressOf()));
RETURN_IF_FAILED (spProfile->AddProfileFilter(0, L"((RES==;FRT==;SUT==))"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(1, L"(!)"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(2, L"((RES==;FRT==;SUT==))"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(3, L"(!)"));
RETURN_IF_FAILED (spProfileCollection->AddProfile(spProfile));
// Face auth only allows 720p@30fps from preview and any from IR pin.
RETURN_IF_FAILED (MFCreateSensorProfile(KSCAMERAPROFILE_FaceAuth_Mode, 0, nullptr,
spProfile.ReleaseAndGetAddressOf()));
RETURN_IF_FAILED (spProfile->AddProfileFilter(0, L"((RES==1280,720;FRT==30,1;SUT==))"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(1, L"(!)"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(2, L"(!)"));
RETURN_IF_FAILED (spProfile->AddProfileFilter(3, L"((RES==;FRT==;SUT==))"));
RETURN_IF_FAILED (spProfileCollection->AddProfile(spProfile));
// Se the profile collection to the attribute store of the IMFTransform.
RETURN_IF_FAILED (spAttributes->SetUnknown(MF_DEVICEMFT_SENSORPROFILE_COLLECTION,
spProfileCollection));
// ... Rest of the InitializeTransform logic...
}
サンプル 2
このシナリオでは、IHV/OEM が、複数の物理デバイスからメディア フローを合成するセンサー グループ変換 (SGT) を提供していることを前提としています。 また、IHV は各物理デバイス (場合によっては異なるベンダーから供給される) のカメラ ドライバーに対して単一の参照実装を提供したが、OEM (または別の IHV) はカメラ ドライバーを異なるセンサーや ISP とペアリングすることを選択したと仮定します。
これにより、参照実装によって宣言された機能の一部が無効になります。 SGT は、基になるハードウェアの機能をより正確に記述するために提供されるプロファイルを更新または削除します。
以下のサンプルは、IMFSensorTransformFactory::InitializeFactory メソッドの実装です。 これは、カメラ サブシステムのドライバー パッケージを生成する IHV/OEM によって実装されます。
IFACEMETHODIMP
SampleSensorTransformFactory::InitializeFactory(
_In_ DWORD dwMaxTransformCount,
_In_ IMFCollection* sensorDevices,
_In_opt_ IMFAttributes* pAttributes
)
{
DWORD sensorDeviceCount = 0;
ComPtr<IUnknown> unknown;
if (nullptr == sensorDevices)
{
return E_INVALIDARG;
}
// For this example, the IHV/OEM added a SGT to a multi-camera
// setup. And the SGT is responsible for updating the profile
// information available from each of the physical cameras, and
// leave it's own profile as "blank". This has the net effect
// of having the SGT support any profile the physical devices
// expose.
RETURN_IF_FAILED (sensorDevices->GetElementCount(&sensorDeviceCount));
for (DWORD idx = 0; idx < sensorDeviceCount; idx++)
{
ComPtr<IMFGetService> service;
ComPtr<IMFSensorProfileCollection> profileCollection;
SENSORPROFILEID sensorProfileId;
RETURN_IF_FAILED (sensorDevices->GetElement(idx,
unknown.ReleaseAndGetAddressOf()));
RETURN_IF_FAILED (unknown.As(service.ReleaseAndGetAddressOf()));
RETURN_IF_FAILED (service->GetService(GUID_NULL,
ID_PPV_ARGS(profileCollection.ReleaseAndGetAddressOf())));
// Let's assume that for this ISP/sensor, we cannot support
// photo sequence but our reference driver published a single
// photo sequence profile whose ID is hardcoded to a static
// variable s_PhotoSequenceProfileId.
RETURN_IF_FAILED (profileCollection->RemoveProfile(&s_PhotoSequenceProfileId));
// Let's also assume this is a low cost ISP/sensor so our driver
// cannot support Video HDR (VHDR) control for high frame rate
// recording and our reference implementation published multiple
// high frame rate recording profile.
//
// Also for this combination of ISP/sensor, we cannot support
// Face Auth (IR doesn't support alternate illumination option).
// So we need to remove all Face Auth from our collection.
for (DWORD profileIdx = 0;
profileIdx < profileCollection->GetProfileCount();)
{
ComPtr<IMFSensorProfile> profile;
RETURN_IF_FAILED (profileCollection->GetProfile(profileIdx,
profile.ReleaseAndGetAddressOf()));
RETURN_IF_FAILED (profile->GetProfileId(&profileId));
if (profileId.Type == KSCAMERAPROFILE_HighFrameRate)
{
RETURN_IF_FAILED (profile->AddBlockedControl(L"VHDR"));
}
if (profileId.Type == KSCAMERAPROFILE_FaceAuth_Mode)
{
RETURN_IF_FAILED (profileCollection->RemoveProfileByIndex(profileIdx));
}
else
{
profileIdx++;
}
}
}
// ... Rest of the InitializeFactory logic...
}
サンプル 3
特定のデバイスに対して選択したプロファイルに基づいて、IMFSensorStream 情報を使用して、プロファイルでサポートまたはサポートされていないデバイスのメディアの種類を決定します。
このサンプルは、Win32 API を直接使用するときにクライアント空間でプロファイルを使用する方法を示すために提供されています。 WinRT API は、CameraProfile API を介して使用されるときに、このロジックを既に実装しています。
HRESULT
CheckMediaTypesOnPin(
_In_z_ LPCWSTR deviceSymbolicName,
_In_ UINT32 pinId,
_In_ SENSORPROFILEID* profileId,
_COM_Outptr_ IMFCollection** mediaTypeCollection
)
{
HRESULT hr = S_OK;
ComPtr<IMFCollection> collection;
ComPtr<IMFSensorGroup> sensorGroup;
ComPtr<IMFGetService> service;
ComPtr<IMFSensorProfileCollection> profileCollection;
ComPtr<IMFSensorProfile> profile;
ComPtr<IMFSensorStream> sensorStream;
DWORD deviceCount = 0;
DWORD streamCount = 0;
DWORD mediaTypeCount = 0;
// Validate in params.
if (nullptr == deviceSymbolicName || nullptr == profileId)
{
return E_INVALIDARG;
}
if (pinId == (UINT32)-1)
{
return MF_E_INVALIDSTREAMNUMBER;
}
if (nullptr == mediaTypeCollection)
{
return E_POINTER;
}
*mediaTypeCollection = nullptr;
RETURN_IF_FAILED (MFCreateCollection(collection.ReleaseAndGetAddressOf()));
// Create the SensorGroup for our device name. This device name
// can be a single physical device name or it can be a multi-device
// group of devices. In either case, MFCreateSensorGroup will create
// a non-activated snapshot of the device(s).
RETURN_IF_FAILED (MFCreateSensorGroup(deviceSymbolicName, &sensorGroup));
RETURN_IF_FAILED (sensorGroup.As(service.ReleaseAndGetAddressOf()));
// Now check if they have a profile collection.
RETURN_IF_FAILED (service->GetService(GUID_NULL,
IID_PPV_ARGS(profileCollection.ReleaseAndGetAddressOf())));
if (profileCollection->GetProfileCount() != 0)
{
// If they published profiles, but we can't find the specific
// profile, it means this camera doesn't support that scenario
// so we should return an empty collection of media types to
// indicate no support.
if (FAILED(profileCollection->FindProfile(profileId,
profile.ReleaseAndGetAddressOf())))
{
*mediaTypeCollection = collection.Detach();
return S_OK;
}
}
// If profiles are not supported, then ALL media types are
// supported. And we can indicate that by keeping the
// profile null. So we have to walk the sensor stream
// but that means we have to find the sensor stream for
// the pinId.
RETURN_IF_FAILED (sensorGroup->GetSensorDeviceCount(&deviceCount));
for (DWORD deviceIdx = 0; deviceIdx < deviceCount &&
sensorStream.Get() == nullptr; deviceIdx++)
{
RETURN_IF_FAILED (sensorGroup->GetSensorDevice(deviceIdx,
sensorDevice.ReleaseAndGetAddressOf()));
RETURN_IF_FAILED (sensorDevice->GetStreamAttributesCount(MFSensorStreamType_Output,
&streamCount));
for (DWORD streamIdx = 0; streamIdx < streamCount; streamIdx++)
{
RETURN_IF_FAILED (sensorDevice->GetStreamAttributes(
MFSensorStreamType_Output,
streamIdx,
&streamAttributes));
if (MFGetAttributesUINT32(streamAttributes,
MF_DEVICESTREAM_STREAM_ID,
(UINT32) -1) == pinId)
{
RETURN_IF_FAILED (streamAttributes.As(sensorStream.ReleaseAndGetAddressOf()));
break;
}
}
}
// If we didn't find a sensorStream for the PinId, then we
// were given bad data....
if (sensorStream.Get() == nullptr)
{
return MF_E_INVALIDSTREAMNUMBER;
}
RETURN_IF_FAILED (sensorStream->GetMediaTypeCount(&mediaTypeCount));
for (DWORD mediaTypeIdx = 0; mediaTypeIdx < mediaTypeCount; mediaTypeIdx++)
{
ComPtr<IMFMediaType> mediaType;
RETURN_IF_FAILED (sensorStream->GetMediaType(mediaTypeIdx,
mediaType.ReleaseAndGetAddressOf()));
if (profile.Get() != nullptr)
{
BOOL supported = FALSE;
RETURN_IF_FAILED (profile->IsMediaTypeSupported(pinId,
mediaType.Get(),
&supported));
if (supported)
{
RETURN_IF_FAILED (collection->AddElement(mediaType.Get()));
}
}
else
{
RETURN_IF_FAILED (collection->AddElement(mediaType.Get()));
}
}
*mediaTypeCollection = collection.Detach();
return S_OK;
}