다음을 통해 공유


DeviceOverrides 레지스트리 키

Beginning with Windows 7, the DeviceOverrides registry key specifies that one or more removable device capability overrides exist in the system. 이동식 디바이스 기능에 대한 자세한 내용은 이동식 디바이스 기능개요를 참조하세요.

The Plug and Play (PnP) manager uses a new ID (container IDs) to group one or more device nodes (devnodes) that originated from and belong to each instance of a particular physical device installed in the computer. 레거시 디바이스의 경우 PnP 관리자는 이동식 디바이스 기능을 통해 컨테이너 ID를 생성합니다. PnP 관리자가 컨테이너 ID를 생성하는 방법에 대한 자세한 내용은 컨테이너 ID 생성 방법을 참조하세요.

이동식 디바이스 기능 재정의를 통해 독립 하드웨어 공급업체(IHV) 또는 OEM(원래 장비 제조업체)이 devnode 또는 devnodes 그룹에서 이동식 디바이스 기능의 해석된 값을 변경할 수 있습니다.

Removable device capability overrides through the DeviceOverrides registry key are useful for legacy devices or third-party hardware components that may not report the removable device capability correctly. 이로 인해 PnP 관리자는 물리적 디바이스에서 열거된 devnode를 그룹화하는 데 사용되는 컨테이너 ID를 잘못 생성합니다.

이러한 재정의는 실제로 devnode에서 보고한 이동식 디바이스 기능의 전역 상태를 변경하지 않습니다. Instead, these overrides cause the PnP manager to ignore the reported device capability and use the registry-based setting when generating a container ID for devnodes that match an override. DeviceOverrides 레지스트리 하위 키 아래의 추가 하위 키는 재정의할 devnode에 대한 자세한 정보를 제공합니다.

The following table defines the DeviceOverrides registry key's format and requirements.

레지스트리 키 이름 Required/optional Format requirements Parent key Child subkeys

DeviceOverrides

Optional

None

None

HardwareID or CompatibleID

Each removable device capability override is specified through either the HardwareID or ContainerID registry subkeys.

The DeviceOverrides registry key is created and maintained under the HKLM\SYSTEM\CurrentControlSet\Control registry tree. 이 레지스트리 키 내에서 하나 이상의 이동식 디바이스 기능 재정의가 생성되거나 유지 관리됩니다.

Removable device capability overrides are specific to individual devices specified through either the HardwareID or CompatibleID registry subkeys. 추가 하위 키는 지정된 디바이스에 대해 열거된 devnode의 경로를 정의합니다. 일반적으로 가장 구체적인 디바이스 하드웨어 ID는 덜 구체적인 하드웨어 또는 호환 ID 대신 디바이스를 식별하는 데 사용해야 합니다. 이렇게 하면 이동식 디바이스 기능 재정의가 의도한 대상 디바이스와 동일한 하드웨어 또는 호환 ID를 공유하는 의도하지 않은 디바이스에 적용되지 않습니다.

The following figure shows the topology of the DeviceOverrides registry key and its related subkeys.

deviceoverrides 레지스트리 키 토폴로지를 보여 주는 다이어그램

The DeviceOverrides registry key must be created for the first removable device capability override that is added to the system. 클린 운영 체제 설치에는 기본적으로 존재하지 않을 수 있습니다.

Note The existence of a removable device capability registry override does not change the global state of the removable device capability on a devnode.