Set-CMTSStepApplyDriverPackage

SYNOPSIS

Skonfiguruj wystąpienie kroku sekwencji zadań Zastosuj pakiet sterowników.

SYNTAX

ByValue (wartość domyślna)

Set-CMTSStepApplyDriverPackage [-BootCriticalContentUniqueId <String>] [-BootCriticalDriverId <String>]
 [-BootCriticalHardwareComponent <String>] [-BootCriticalId <String>] [-BootCriticalInfFile <String>]
 [-EnableRecurse <Boolean>] [-EnableUnsignedDriver <Boolean>] [-PackageId <String>]
 [-AddCondition <IResultObject[]>] [-ClearCondition] [-Description <String>] -InputObject <IResultObject>
 [-IsContinueOnError <Boolean>] [-IsEnabled <Boolean>] [-MoveToIndex <Int32>] [-NewStepName <String>]
 [-RemoveConditionFile] [-RemoveConditionFolder] [-RemoveConditionIfStatement]
 [-RemoveConditionOperatingSystem] [-RemoveConditionQueryWmi] [-RemoveConditionRegistry]
 [-RemoveConditionSoftware] [-RemoveConditionVariable] [-StepName <String>] [-StepOrder <ReorderType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ById

Set-CMTSStepApplyDriverPackage [-BootCriticalContentUniqueId <String>] [-BootCriticalDriverId <String>]
 [-BootCriticalHardwareComponent <String>] [-BootCriticalId <String>] [-BootCriticalInfFile <String>]
 [-EnableRecurse <Boolean>] [-EnableUnsignedDriver <Boolean>] [-PackageId <String>]
 [-AddCondition <IResultObject[]>] [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>]
 [-IsEnabled <Boolean>] [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile]
 [-RemoveConditionFolder] [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem]
 [-RemoveConditionQueryWmi] [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable]
 [-StepName <String>] [-StepOrder <ReorderType>] -TaskSequenceId <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

Nazwa_użytkownika

Set-CMTSStepApplyDriverPackage [-BootCriticalContentUniqueId <String>] [-BootCriticalDriverId <String>]
 [-BootCriticalHardwareComponent <String>] [-BootCriticalId <String>] [-BootCriticalInfFile <String>]
 [-EnableRecurse <Boolean>] [-EnableUnsignedDriver <Boolean>] [-PackageId <String>]
 [-AddCondition <IResultObject[]>] [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>]
 [-IsEnabled <Boolean>] [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile]
 [-RemoveConditionFolder] [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem]
 [-RemoveConditionQueryWmi] [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable]
 [-StepName <String>] [-StepOrder <ReorderType>] -TaskSequenceName <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionIfStatement

Set-CMTSStepApplyDriverPackage [-Condition <IResultObject[]>] [-SetConditionIfStatement]
 [-StatementType <ConditionStatementType>] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionIfStatement

Set-CMTSStepApplyDriverPackage [-Condition <IResultObject[]>] [-SetConditionIfStatement]
 [-StatementType <ConditionStatementType>] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionIfStatement

Set-CMTSStepApplyDriverPackage [-Condition <IResultObject[]>] -InputObject <IResultObject>
 [-SetConditionIfStatement] [-StatementType <ConditionStatementType>] [-StepName <String>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionVariable

Set-CMTSStepApplyDriverPackage [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 [-OperatorType <VariableOperatorType>] [-SetConditionVariable] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionVariable

Set-CMTSStepApplyDriverPackage [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 [-OperatorType <VariableOperatorType>] [-SetConditionVariable] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionVariable

Set-CMTSStepApplyDriverPackage [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 -InputObject <IResultObject> [-OperatorType <VariableOperatorType>] [-SetConditionVariable]
 [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByIdSetConditionFile

Set-CMTSStepApplyDriverPackage [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile] [-StepName <String>]
 -TaskSequenceId <String> [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionFile

Set-CMTSStepApplyDriverPackage [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile] [-StepName <String>]
 -TaskSequenceName <String> [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionFile

Set-CMTSStepApplyDriverPackage [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] -InputObject <IResultObject> [-SetConditionFile]
 [-StepName <String>] [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionFolder

Set-CMTSStepApplyDriverPackage [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionFolder

Set-CMTSStepApplyDriverPackage [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionFolder

Set-CMTSStepApplyDriverPackage [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] -InputObject <IResultObject> [-SetConditionFolder] [-StepName <String>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionQueryWmi

Set-CMTSStepApplyDriverPackage -InputObject <IResultObject> [-Namespace <String[]>] [-Query <String>]
 [-SetConditionQueryWmi] [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByValueSetConditionOperatingSystem

Set-CMTSStepApplyDriverPackage -InputObject <IResultObject> [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByValueSetConditionRegistry

Set-CMTSStepApplyDriverPackage -InputObject <IResultObject> [-RegistryKey <String>]
 [-RegistryOperator <VariableOperatorType>] [-RegistryValueData <String>] [-RegistryValueName <String>]
 [-RootKey <RegistryRootKeyType>] [-SetConditionRegistry] [-StepName <String>] [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionSoftware

Set-CMTSStepApplyDriverPackage -InputObject <IResultObject> [-IsAnyVersion <Boolean>] [-MsiFilePath <String>]
 [-SetConditionSoftware] [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionSoftware

Set-CMTSStepApplyDriverPackage [-IsAnyVersion <Boolean>] [-MsiFilePath <String>] [-SetConditionSoftware]
 [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByNameSetConditionSoftware

Set-CMTSStepApplyDriverPackage [-IsAnyVersion <Boolean>] [-MsiFilePath <String>] [-SetConditionSoftware]
 [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionQueryWmi

Set-CMTSStepApplyDriverPackage [-Namespace <String[]>] [-Query <String>] [-SetConditionQueryWmi]
 [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByNameSetConditionQueryWmi

Set-CMTSStepApplyDriverPackage [-Namespace <String[]>] [-Query <String>] [-SetConditionQueryWmi]
 [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionRegistry

Set-CMTSStepApplyDriverPackage [-RegistryKey <String>] [-RegistryOperator <VariableOperatorType>]
 [-RegistryValueData <String>] [-RegistryValueName <String>] [-RootKey <RegistryRootKeyType>]
 [-SetConditionRegistry] [-StepName <String>] -TaskSequenceId <String> [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionRegistry

Set-CMTSStepApplyDriverPackage [-RegistryKey <String>] [-RegistryOperator <VariableOperatorType>]
 [-RegistryValueData <String>] [-RegistryValueName <String>] [-RootKey <RegistryRootKeyType>]
 [-SetConditionRegistry] [-StepName <String>] -TaskSequenceName <String> [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionOperatingSystem

Set-CMTSStepApplyDriverPackage [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] -TaskSequenceId <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionOperatingSystem

Set-CMTSStepApplyDriverPackage [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] -TaskSequenceName <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

DESCRIPTION

To polecenie cmdlet umożliwia skonfigurowanie wystąpienia kroku sekwencji zadań Zastosuj pakiet sterowników.

Aby uzyskać więcej informacji na temat tego kroku, zobacz Informacje o krokach sekwencji zadań: Stosowanie pakietu sterowników.

EXAMPLES

Przykład 1

W tym przykładzie zmienia się krok Zastosuj pakiet sterowników w sekwencji zadań domyślnego wdrożenia systemu operacyjnego, aby włączyć rekursję DISM i wyłączyć niepodpisane sterowniki.

$tsName = "Default OS deployment"
$tsStepNameApplyDvrPkg = "Apply driver package"

Set-CMTSStepApplyDriverPackage -TaskSequenceName $tsName -StepName $tsStepNameApplyDvrPkg -EnableRecurse $true -EnableUnsignedDriver $false

PARAMETERS

-AddCondition

Określ obiekt warunku do dodania do tego kroku. Aby uzyskać ten obiekt, użyj jednego z polecenia cmdlet warunku sekwencji zadań. Na przykład Get-CMTSStepConditionVariable.

Type: IResultObject[]
Parameter Sets: ByValue, ById, ByName
Aliases: AddConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-BootCriticalContentUniqueId

Ten parametr jest przestarzały, ma zastosowanie tylko do wersji Windows systemu operacyjnego Vista.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-BootCriticalDriverId

Ten parametr jest przestarzały, ma zastosowanie tylko do wersji Windows systemu operacyjnego Vista.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-BootCriticalHardwareComponent

Ten parametr jest przestarzały, ma zastosowanie tylko do wersji Windows systemu operacyjnego Vista.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-BootCriticalId

Ten parametr jest przestarzały, ma zastosowanie tylko do wersji Windows systemu operacyjnego Vista.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-BootCriticalInfFile

Ten parametr jest przestarzały, ma zastosowanie tylko do wersji Windows systemu operacyjnego Vista.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ClearCondition

Usuń warunek z tego kroku. Użyj parametru -Condition, aby określić warunek do usunięcia.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases: ClearConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Warunek

Określ obiekt warunku do użycia w tym kroku. Aby uzyskać ten obiekt, użyj jednego z polecenia cmdlet warunku sekwencji zadań. Na przykład Get-CMTSStepConditionVariable.

Type: IResultObject[]
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: SubCondition, SubConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableName

Określ nazwę zmiennej sekwencji zadań do użycia jako warunek.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Variable

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableValue

Określ wartość zmiennej sekwencji zadań do użycia w warunku.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Value

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Confirm

Monituje o potwierdzenie przed uruchomieniem polecenia cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Description (Opis)

Podaj opcjonalny opis tego kroku sekwencji zadań.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-DisableWildcardHandling

Ten parametr traktuje symbole wieloznaczne jako wartości literału znaków. Nie można połączyć go z forceWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-EnableRecurse

Ustaw ten parametr na $true , aby zainstalować pakiet sterowników, uruchamiając program DISM z opcją recurse.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-EnableUnsignedDriver

Ustaw ten parametr na , aby wykonać nienadzorowane instalowanie niepodpisanych sterowników w wersji $true programu Windows gdzie ta akcja jest dozwolona.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileDateTimeOperator

Określ typ operatora zmiennej dla warunku daty/czasu pliku.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FilePath

Określ ścieżkę warunku pliku.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileTimestamp

Określ wartość daty/czasu do użycia dla warunku pliku.

Type: DateTime
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileVersion

Określ ciąg wersji dla warunku pliku.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderDateTimeOperator

Określ operator zmiennej dla warunku daty/czasu folderu.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderPath

Określ ścieżkę warunku folderu.

Type: String
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderTimestamp

Określ wartość daty/czasu do użycia dla warunku folderu.

Type: DateTime
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ForceWildcardHandling

Ten parametr przetwarza symbole wieloznaczne i może prowadzić do nieoczekiwanego zachowania (nie jest zalecane). Nie można połączyć go z disableWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-InputObject

Określ obiekt sekwencji zadań z krokiem Zastosuj pakiet sterowników do skonfigurowania. Aby uzyskać ten obiekt, użyj polecenia cmdlet Get-CMTaskSequence.

Type: IResultObject
Parameter Sets: ByValue, ByValueSetConditionIfStatement, ByValueSetConditionVariable, ByValueSetConditionFile, ByValueSetConditionFolder, ByValueSetConditionQueryWmi, ByValueSetConditionOperatingSystem, ByValueSetConditionRegistry, ByValueSetConditionSoftware
Aliases: TaskSequence

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

-IsAnyVersion

Użyj tego parametru z parametrem SetConditionSoftware, aby dopasować dowolną wersję produktu.

Type: Boolean
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsContinueOnError

Użyj tego parametru, aby włączyć opcję kroku Kontynuuj przy błędzie. Jeśli ta opcja zostanie włączyć, jeśli krok zakończy się niepowodzeniem, sekwencja zadań będzie kontynuowana.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepContinueOnError

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsEnabled

Użyj tego parametru, aby włączyć ten krok sekwencji zadań.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepEnabled

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MoveToIndex

Przenieś ten krok do określonej pozycji indeksu w sekwencji zadań.

Type: Int32
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MsiFilePath

Określ ścieżkę do pliku Windows instalatora dla warunku oprogramowania.

Type: String
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Przestrzeń nazw

Określ przestrzeń nazw dla warunku zapytania usługi WMI.

Type: String[]
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-NewStepName

Użyj tego parametru, aby zmienić nazwę tego kroku sekwencji zadań.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-OperatorType

Określ operator do użycia z warunkiem zmiennej sekwencji zadań.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-PackageId

Określ identyfikator pakietu sterowników dla tego kroku do zastosowania. Ta wartość to standardowy identyfikator pakietu, na przykład XYZ0030D .

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Query (Zapytanie)

Określ ciąg zapytania WMI do użycia dla warunku.

Type: String
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryKey (Klucz rejestru)

Określ klucz do użycia z warunkiem rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryOperator

Określ operator do użycia z warunkiem rejestru.

Type: VariableOperatorType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueData

Określ dane wartości do użycia z warunkiem rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueName

Określ nazwę wartości do użycia z warunkiem rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFile

Użyj tego parametru, aby usunąć warunek pliku.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFolder

Użyj tego parametru, aby usunąć warunek folderu.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionIfStatement

Użyj tego parametru, aby usunąć if warunek instrukcji .

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionOperatingSystem

Użyj tego parametru, aby usunąć warunek systemu operacyjnego.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionQueryWmi

Użyj tego parametru, aby usunąć warunek zapytania WMI.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionRegistry

Użyj tego parametru, aby usunąć warunek rejestru.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionSoftware

Użyj tego parametru, aby usunąć warunek oprogramowania.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionVariable

Użyj tego parametru, aby usunąć warunek zmiennej sekwencji zadań.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RootKey

Określ klucz główny do użycia z warunkiem rejestru.

Type: RegistryRootKeyType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFile

Dodaj nowy warunek pliku.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFolder

Dodaj nowy warunek folderu.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionIfStatement

Dodaj nowy if warunek instrukcji.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionOperatingSystem

Dodaj nowy warunek systemu operacyjnego.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionQueryWmi

Dodaj nowy warunek zapytania WMI.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionRegistry

Dodaj nowy warunek rejestru.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionSoftware

Dodaj nowy warunek oprogramowania.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionVariable

Dodaj nowy warunek zmiennej sekwencji zadań.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StatementType

Ustaw typ warunku if instrukcji .

Type: ConditionStatementType
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: Operator
Accepted values: All, Any, None

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepName

Określ nazwę kroku do wybrania dla zmian.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepOrder

Ten parametr umożliwia zmianę kolejności kroków w sekwencji zadań.

Type: ReorderType
Parameter Sets: ByValue, ById, ByName
Aliases:
Accepted values: MoveUp, MoveDown, MoveToIndex

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SupportedPlatform (ObsługiwanyPlatforma)

Użyj tego parametru, aby określić platformy dla warunku systemu operacyjnego.

Type: IResultObject[]
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases: SupportedPlatforms

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceId

Określ identyfikator pakietu sekwencji zadań w kroku Zastosuj pakiet sterowników do skonfigurowania. Ta wartość to standardowy identyfikator pakietu, na przykład XYZ00858 .

Type: String
Parameter Sets: ById, ByIdSetConditionIfStatement, ByIdSetConditionVariable, ByIdSetConditionFile, ByIdSetConditionFolder, ByIdSetConditionSoftware, ByIdSetConditionQueryWmi, ByIdSetConditionRegistry, ByIdSetConditionOperatingSystem
Aliases: Id, TaskSequencePackageId

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceName

Określ nazwę sekwencji zadań, która ma być docelowa dla zmian.

Type: String
Parameter Sets: ByName, ByNameSetConditionIfStatement, ByNameSetConditionVariable, ByNameSetConditionFile, ByNameSetConditionFolder, ByNameSetConditionSoftware, ByNameSetConditionQueryWmi, ByNameSetConditionRegistry, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ValueType

Określ typ wartości warunku rejestru.

Type: RegistryValueType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: RegistrySZ, RegistryExpandSZ, RegistryDWord

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-VersionOperator

Określ operator do użycia z warunkiem pliku.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-WhatIf

Pokazuje, co się stanie po uruchomieniu polecenia cmdlet. Polecenie cmdlet nie jest uruchamiane.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Typowe parametry

To polecenie cmdlet obsługuje typowe parametry: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction i -WarningVariable. Aby uzyskać więcej informacji, zobacz about_CommonParameters.

INPUTS

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

OUTPUTS

System.Object

UWAGI

RELATED LINKS

Get-CMTSStepApplyDriverPackage New-CMTSStepApplyDriverPackage Remove-CMTSStepApplyDriverPackage

Informacje o krokach sekwencji zadań: Stosowanie pakietu sterowników