Set-CMTSStepRunTaskSequence

SYNOPSIS

To polecenie cmdlet umożliwia edytowanie kroku sekwencji zadań Uruchom sekwencję zadań.

SYNTAX

ByValue (wartość domyślna)

Set-CMTSStepRunTaskSequence [-RunTaskSequence <IResultObject>] [-AddCondition <IResultObject[]>]
 [-ClearCondition] [-Description <String>] -InputObject <IResultObject> [-IsContinueOnError <Boolean>]
 [-IsEnabled <Boolean>] [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile]
 [-RemoveConditionFolder] [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem]
 [-RemoveConditionQueryWmi] [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable]
 [-StepName <String>] [-StepOrder <ReorderType>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ById

Set-CMTSStepRunTaskSequence [-RunTaskSequence <IResultObject>] [-AddCondition <IResultObject[]>]
 [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>] [-IsEnabled <Boolean>]
 [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile] [-RemoveConditionFolder]
 [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem] [-RemoveConditionQueryWmi]
 [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable] [-StepName <String>]
 [-StepOrder <ReorderType>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling]
 [-WhatIf] [-Confirm] [<CommonParameters>]

Nazwa_użytkownika

Set-CMTSStepRunTaskSequence [-RunTaskSequence <IResultObject>] [-AddCondition <IResultObject[]>]
 [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>] [-IsEnabled <Boolean>]
 [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile] [-RemoveConditionFolder]
 [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem] [-RemoveConditionQueryWmi]
 [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable] [-StepName <String>]
 [-StepOrder <ReorderType>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling]
 [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionIfStatement

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-Condition <IResultObject[]>]
 [-SetConditionIfStatement] [-StatementType <ConditionStatementType>] [-StepName <String>]
 -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByNameSetConditionIfStatement

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-Condition <IResultObject[]>]
 [-SetConditionIfStatement] [-StatementType <ConditionStatementType>] [-StepName <String>]
 -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByValueSetConditionIfStatement

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-Condition <IResultObject[]>]
 -InputObject <IResultObject> [-SetConditionIfStatement] [-StatementType <ConditionStatementType>]
 [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByIdSetConditionVariable

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-ConditionVariableName <String>]
 [-ConditionVariableValue <String>] [-OperatorType <VariableOperatorType>] [-SetConditionVariable]
 [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByNameSetConditionVariable

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-ConditionVariableName <String>]
 [-ConditionVariableValue <String>] [-OperatorType <VariableOperatorType>] [-SetConditionVariable]
 [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByValueSetConditionVariable

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-ConditionVariableName <String>]
 [-ConditionVariableValue <String>] -InputObject <IResultObject> [-OperatorType <VariableOperatorType>]
 [-SetConditionVariable] [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionFile

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-FileDateTimeOperator <VariableOperatorType>]
 [-FilePath <String>] [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile]
 [-StepName <String>] -TaskSequenceId <String> [-VersionOperator <VariableOperatorType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionFile

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-FileDateTimeOperator <VariableOperatorType>]
 [-FilePath <String>] [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile]
 [-StepName <String>] -TaskSequenceName <String> [-VersionOperator <VariableOperatorType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionFile

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-FileDateTimeOperator <VariableOperatorType>]
 [-FilePath <String>] [-FileTimestamp <DateTime>] [-FileVersion <String>] -InputObject <IResultObject>
 [-SetConditionFile] [-StepName <String>] [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionFolder

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-FolderDateTimeOperator <VariableOperatorType>]
 [-FolderPath <String>] [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>]
 -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByNameSetConditionFolder

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-FolderDateTimeOperator <VariableOperatorType>]
 [-FolderPath <String>] [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>]
 -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByValueSetConditionFolder

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-FolderDateTimeOperator <VariableOperatorType>]
 [-FolderPath <String>] [-FolderTimestamp <DateTime>] -InputObject <IResultObject> [-SetConditionFolder]
 [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByValueSetConditionQueryWmi

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> -InputObject <IResultObject>
 [-Namespace <String[]>] [-Query <String>] [-SetConditionQueryWmi] [-StepName <String>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionOperatingSystem

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> -InputObject <IResultObject>
 [-SetConditionOperatingSystem] [-StepName <String>] [-SupportedPlatform <IResultObject[]>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionRegistry

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> -InputObject <IResultObject>
 [-RegistryKey <String>] [-RegistryOperator <VariableOperatorType>] [-RegistryValueData <String>]
 [-RegistryValueName <String>] [-RootKey <RegistryRootKeyType>] [-SetConditionRegistry] [-StepName <String>]
 [-ValueType <RegistryValueType>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByValueSetConditionSoftware

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> -InputObject <IResultObject>
 [-IsAnyVersion <Boolean>] [-MsiFilePath <String>] [-SetConditionSoftware] [-StepName <String>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionSoftware

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-IsAnyVersion <Boolean>] [-MsiFilePath <String>]
 [-SetConditionSoftware] [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionSoftware

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-IsAnyVersion <Boolean>] [-MsiFilePath <String>]
 [-SetConditionSoftware] [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionQueryWmi

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-Namespace <String[]>] [-Query <String>]
 [-SetConditionQueryWmi] [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionQueryWmi

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-Namespace <String[]>] [-Query <String>]
 [-SetConditionQueryWmi] [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionRegistry

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-RegistryKey <String>]
 [-RegistryOperator <VariableOperatorType>] [-RegistryValueData <String>] [-RegistryValueName <String>]
 [-RootKey <RegistryRootKeyType>] [-SetConditionRegistry] [-StepName <String>] -TaskSequenceId <String>
 [-ValueType <RegistryValueType>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByNameSetConditionRegistry

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-RegistryKey <String>]
 [-RegistryOperator <VariableOperatorType>] [-RegistryValueData <String>] [-RegistryValueName <String>]
 [-RootKey <RegistryRootKeyType>] [-SetConditionRegistry] [-StepName <String>] -TaskSequenceName <String>
 [-ValueType <RegistryValueType>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByIdSetConditionOperatingSystem

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-SetConditionOperatingSystem]
 [-StepName <String>] [-SupportedPlatform <IResultObject[]>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionOperatingSystem

Set-CMTSStepRunTaskSequence -RunTaskSequence <IResultObject> [-SetConditionOperatingSystem]
 [-StepName <String>] [-SupportedPlatform <IResultObject[]>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

DESCRIPTION

Począwszy od wersji 1906, użyj tego polecenia cmdlet, aby edytować krok sekwencji zadań Uruchom sekwencję zadań.

EXAMPLES

Przykład 1: zmiana podrzędnej sekwencji zadań do uruchomienia

Ten przykład pobiera obiekty dla obu sekwencji zadań. Następnie zmienia podrzędną sekwencję zadań uruchamianą z kroku Uruchom sekwencję zadań w nadrzędnej sekwencji zadań.

$parentTS = Get-CMTaskSequence -Name "parent task sequence"
$childTS = Get-CMTaskSequence -Name "child task sequence"
$parentTS | Set-CMTSStepRunTaskSequence -RunTaskSequence $childTS

PARAMETERS

-AddCondition

Określ obiekt warunku kroku sekwencji zadań do dodania do określonej sekwencji zadań. Na przykład użyj polecenia cmdlet Get-CMTSStepConditionVariable.

Type: IResultObject[]
Parameter Sets: ByValue, ById, ByName
Aliases: AddConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ClearCondition

Usuń określony warunek z kroku sekwencji zadań.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases: ClearConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Warunek

Określ obiekt warunku kroku sekwencji zadań. Na przykład użyj polecenia cmdlet Get-CMTSStepConditionVariable.

Type: IResultObject[]
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: SubCondition, SubConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableName

Określ nazwę zmiennej do dodania jako warunek do kroku sekwencji zadań.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Variable

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableValue

Określ wartość zmiennej, która ma być dodana jako warunek do kroku sekwencji zadań.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Value

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Confirm

Monituje o potwierdzenie przed uruchomieniem polecenia cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Description (Opis)

Określ opis kroku sekwencji zadań.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-DisableWildcardHandling

Ten parametr traktuje symbole wieloznaczne jako wartości literału znaków. Nie można połączyć go z forceWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileDateTimeOperator

Określ typ operatora zmiennej dla warunku daty/czasu pliku.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FilePath

Określ ścieżkę warunku pliku.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileTimestamp

Określ wartość daty/czasu do użycia dla warunku pliku.

Type: DateTime
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileVersion

Określ ciąg wersji dla warunku pliku.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderDateTimeOperator

Określ operator zmiennej dla warunku daty/czasu folderu.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderPath

Określ ścieżkę warunku folderu.

Type: String
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderTimestamp

Określ wartość daty/czasu do użycia dla warunku folderu.

Type: DateTime
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ForceWildcardHandling

Ten parametr przetwarza symbole wieloznaczne i może prowadzić do nieoczekiwanego zachowania. Nie jest to zalecane. Nie można połączyć go z disableWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-InputObject

Określ obiekt sekwencji zadań do zmodyfikowania.

Type: IResultObject
Parameter Sets: ByValue, ByValueSetConditionIfStatement, ByValueSetConditionVariable, ByValueSetConditionFile, ByValueSetConditionFolder, ByValueSetConditionQueryWmi, ByValueSetConditionOperatingSystem, ByValueSetConditionRegistry, ByValueSetConditionSoftware
Aliases: TaskSequence

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

-IsAnyVersion

Użyj tego parametru z parametrem SetConditionSoftware, aby dopasować dowolną wersję produktu.

Type: Boolean
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsContinueOnError

Sprawdź, czy ten krok sekwencji zadań jest skonfigurowany do kontynuowania w przypadku błędu.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepContinueOnError

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsEnabled

Sprawdź, czy ten krok sekwencji zadań jest włączony.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepEnabled

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MoveToIndex

Przenieś określony krok sekwencji zadań do określonego indeksu liczb całkowitych.

Type: Int32
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MsiFilePath

Określ ścieżkę do pliku Windows instalatora dla warunku oprogramowania.

Type: String
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Przestrzeń nazw

Określ przestrzeń nazw dla warunku zapytania usługi WMI.

Type: String[]
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-NewStepName

Określ nową nazwę dla tego kroku sekwencji zadań.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-OperatorType

Określ operator do użycia z warunkiem zmiennej sekwencji zadań.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Query (Zapytanie)

Określ ciąg zapytania WMI do użycia dla warunku.

Type: String
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryKey

Określ klucz do użycia z warunkiem rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryOperator

Określ operator do użycia z warunkiem rejestru.

Type: VariableOperatorType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueData

Określ dane wartości do użycia z warunkiem rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueName

Określ nazwę wartości do użycia z warunkiem rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFile

Użyj tego parametru, aby usunąć warunek pliku.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFolder

Użyj tego parametru, aby usunąć warunek folderu.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionIfStatement

Użyj tego parametru, aby usunąć if warunek instrukcji.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionOperatingSystem

Użyj tego parametru, aby usunąć warunek systemu operacyjnego.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionQueryWmi

Użyj tego parametru, aby usunąć warunek zapytania WMI.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionRegistry

Użyj tego parametru, aby usunąć warunek rejestru.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionSoftware

Użyj tego parametru, aby usunąć warunek oprogramowania.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionVariable

Użyj tego parametru, aby usunąć warunek zmiennej sekwencji zadań.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RootKey

Określ klucz główny do użycia z warunkiem rejestru.

Type: RegistryRootKeyType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RunTaskSequence

Określ obiekt podrzędnej sekwencji zadań do uruchomienia w tym kroku.

Type: IResultObject
Parameter Sets: ByValue, ById, ByName
Aliases: Child

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Type: IResultObject
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement, ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable, ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile, ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder, ByValueSetConditionQueryWmi, ByValueSetConditionOperatingSystem, ByValueSetConditionRegistry, ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi, ByIdSetConditionRegistry, ByNameSetConditionRegistry, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases: Child

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFile

Dodaj nowy warunek pliku.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFolder

Dodaj nowy warunek folderu.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionIfStatement

Dodaj nowy if warunek instrukcji.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionOperatingSystem

Dodaj nowy warunek systemu operacyjnego.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionQueryWmi

Dodaj nowy warunek zapytania WMI.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionRegistry

Dodaj nowy warunek rejestru.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionSoftware

Dodaj nowy warunek oprogramowania.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionVariable

Dodaj nowy warunek zmiennej sekwencji zadań.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StatementType

Ustaw typ warunku if instrukcji .

Type: ConditionStatementType
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: Operator
Accepted values: All, Any, None

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepName

Określ nazwę docelowego kroku sekwencji zadań.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepOrder

Użyj tego parametru, aby zmienić kolejność kroków w sekwencji zadań.

Type: ReorderType
Parameter Sets: ByValue, ById, ByName
Aliases:
Accepted values: MoveUp, MoveDown, MoveToIndex

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SupportedPlatform

Użyj tego parametru, aby określić platformy dla warunku systemu operacyjnego.

Type: IResultObject[]
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases: SupportedPlatforms

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceId

Określ identyfikator sekwencji zadań docelowej.

Type: String
Parameter Sets: ById, ByIdSetConditionIfStatement, ByIdSetConditionVariable, ByIdSetConditionFile, ByIdSetConditionFolder, ByIdSetConditionSoftware, ByIdSetConditionQueryWmi, ByIdSetConditionRegistry, ByIdSetConditionOperatingSystem
Aliases: Id, TaskSequencePackageId

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceName

Określ nazwę sekwencji zadań docelowej.

Type: String
Parameter Sets: ByName, ByNameSetConditionIfStatement, ByNameSetConditionVariable, ByNameSetConditionFile, ByNameSetConditionFolder, ByNameSetConditionSoftware, ByNameSetConditionQueryWmi, ByNameSetConditionRegistry, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ValueType

Określ typ wartości warunku rejestru.

Type: RegistryValueType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: RegistrySZ, RegistryExpandSZ, RegistryDWord

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-VersionOperator

Określ operator do użycia z warunkiem pliku.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-WhatIf

Pokazuje, co się stanie po uruchomieniu polecenia cmdlet. Polecenie cmdlet nie jest uruchamiane.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Typowe parametry

To polecenie cmdlet obsługuje typowe parametry: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction i -WarningVariable. Aby uzyskać więcej informacji, zobacz about_CommonParameters.

Udostępnij przez