This module implements and configures the firewall for the Remote Configuration Framework.
The following table shows the configurable settings for FIREWALL.
| Value : Type | Access | Index | Description |
|---|---|---|---|
| Flags : STRING | Read-write | Handle | Specifies a set of FW_RULE_FLAGS values that are combined to specify rule flags for the firewall. |
| Mask : STRING | Read-write | Handle | Specifies a set of FW_RULE_MASKS values that are used in combination with each other to specify which fields of the FW_RULE structure are valid. |
| Description : STRING | Read-write | Handle | String that specifies the description of a firewall rule. |
| PrivateHost : STRING | Read-write | Handle | Specifies the IP address that identifies a host on the private network. |
| PrivateHostFamily : STRING | Read-write | Handle | Specifies the IP address family for a host on the private network. |
| PublicHost : STRING | Read-write | Handle | Specifies the IP address of the host on the public side of the firewall. |
| PublicHostFamily : STRING | Read-write | Handle | Specifies the IP address family for a host on the public network. |
| Protocol : STRING | Read-write | Handle | Specifies the protocol the firewall rule applies to. |
| Action : STRING | Read-write | Handle | Used for logging rules to specify whether to log packets that are blocked or packets that are allowed. |
| HourStart : STRING | Read-write | Handle | Specifies the time of day for the rule to become active, in 24-hour time. |
| HourEnd : STRING | Read-write | Handle | Specifies the time of day for the rule to become inactive, in 24-hour time. |
| DayOfWeek : STRING | Read-write | Handle | Specifies the DAY OF WEEK value for the day of the week on which the rule is active. |
| Day : STRING | Read-write | Handle | Specifies the day of the month on which the rule is active. |
| Month : STRING | Read-write | Handle | Specifies the month on which the rule is active. |
| PortMin : STRING | Read-write | Handle | Specifies the lower end of the port range for which the rule applies for TCP or UDP packets. |
| PortMax : STRING | Read-write | Handle | Specifies the upper end of the port range for which the rule applies for TCP or UDP packets. |
| Type : STRING | Read-write | Handle | Indicates that the rule applies only to ICMP packets of specified type. |
| Code : STRING | Read-write | Handle | Indicates that the rule applies only to ICMP packets with the specified code. |
| New : STRING | Read-write | Handle | Specifies a new firewall rule. |
See Also
Remote Configuration Framework Modules
Send Feedback on this topic to the authors