HOW TO：將面板加入至 StatusBar 控制項

重要事項
StatusStrip 和 ToolStripStatusLabel 控制項會取代和加入功能至 StatusBar 和 StatusBarPanel 控制項；不過 StatusBar 和 StatusBarPanel 控制項會保留以提供回溯相容性和未來使用 (如果您選擇要使用)。

在 StatusBar 控制項 (Windows Form) 控制項內的可程式化區域，是由 StatusBarPanel 類別的執行個體 (Instance) 所組成。 這些是經由其他方式加入至 StatusBar.StatusBarPanelCollection 類別。

若要將面板加入至狀態列

• 在程序中，藉由加入至 StatusBar.StatusBarPanelCollection 來建立狀況列面板。 使用透過 Panels 屬性傳遞的個別面板索引來指定各個面板的屬性設定。

  在下列的範例程式碼中，為圖示位置所設定的路徑是 [我的文件] 資料夾。 這個位置的使用，是因為您可假設大部分執行 Windows 作業系統的電腦，都會包含這個資料夾。 選擇這個位置也可讓使用者以最基本的系統存取層級，便可安全執行應用程式。 下列範例假設已將 StatusBar 控制項加入表單。

  注意事項
  StatusBar.StatusBarPanelCollection 是個以零起始的集合，所以程式碼都應該依序處理。

  Public Sub CreateStatusBarPanels()
  ' Create panels and set text property.
     StatusBar1.Panels.Add("One")
     StatusBar1.Panels.Add("Two")
     StatusBar1.Panels.Add("Three")
  ' Set properties of StatusBar panels.
  ' Set AutoSize property of panels.
     StatusBar1.Panels(0).AutoSize = StatusBarPanelAutoSize.Spring
     StatusBar1.Panels(1).AutoSize = StatusBarPanelAutoSize.Contents
     StatusBar1.Panels(2).AutoSize = StatusBarPanelAutoSize.Contents
  ' Set BorderStyle property of panels.
     StatusBar1.Panels(0).BorderStyle = StatusBarPanelBorderStyle.Raised
     StatusBar1.Panels(1).BorderStyle = StatusBarPanelBorderStyle.Sunken
     StatusBar1.Panels(2).BorderStyle = StatusBarPanelBorderStyle.Raised
  ' Set Icon property of third panel. You should replace the bolded
  ' icon in the sample below with an icon of your own choosing.
     StatusBar1.Panels(2).Icon = New _ 
     System.Drawing.Icon(System.Environment.GetFolderPath _
     (System.Environment.SpecialFolder.Personal) _
     & "\Icon.ico")
     StatusBar1.ShowPanels = True
  End Sub
  

  public void CreateStatusBarPanels()
  {
     // Create panels and set text property.
     statusBar1.Panels.Add("One");
     statusBar1.Panels.Add("Two");
     statusBar1.Panels.Add("Three");
     // Set properties of StatusBar panels.
     // Set AutoSize property of panels.
     statusBar1.Panels[0].AutoSize = StatusBarPanelAutoSize.Spring;
     statusBar1.Panels[1].AutoSize = StatusBarPanelAutoSize.Contents;
     statusBar1.Panels[2].AutoSize = StatusBarPanelAutoSize.Contents;
     // Set BorderStyle property of panels.
     statusBar1.Panels[0].BorderStyle =
        StatusBarPanelBorderStyle.Raised;
     statusBar1.Panels[1].BorderStyle = StatusBarPanelBorderStyle.Sunken;
     statusBar1.Panels[2].BorderStyle = StatusBarPanelBorderStyle.Raised;
     // Set Icon property of third panel. You should replace the bolded
     // icon in the sample below with an icon of your own choosing.
     // Note the escape character used (@) when specifying the path.
     statusBar1.Panels[2].Icon = 
        new System.Drawing.Icon (System.Environment.GetFolderPath _
     (System.Environment.SpecialFolder.Personal) _
     + @"\Icon.ico");
     statusBar1.ShowPanels = true;
  }
  

  public:
     void CreateStatusBarPanels()
     {
        // Create panels and set text property.
        statusBar1->Panels->Add("One");
        statusBar1->Panels->Add("Two");
        statusBar1->Panels->Add("Three");
        // Set properties of StatusBar panels.
        // Set AutoSize property of panels.
        statusBar1->Panels[0]->AutoSize =
           StatusBarPanelAutoSize::Spring;
        statusBar1->Panels[1]->AutoSize =
           StatusBarPanelAutoSize::Contents;
        statusBar1->Panels[2]->AutoSize =
           StatusBarPanelAutoSize::Contents;
        // Set BorderStyle property of panels.
        statusBar1->Panels[0]->BorderStyle =
           StatusBarPanelBorderStyle::Raised;
        statusBar1->Panels[1]->BorderStyle =
           StatusBarPanelBorderStyle::Sunken;
        statusBar1->Panels[2]->BorderStyle =
           StatusBarPanelBorderStyle::Raised;
        // Set Icon property of third panel.
        // You should replace the bolded image 
        // in the sample below with an icon of your own choosing.
        statusBar1->Panels[2]->Icon =
           gcnew System::Drawing::Icon(String::Concat(
           System::Environment::GetFolderPath(
           System::Environment::SpecialFolder::Personal),
           "\\Icon.ico"));
        statusBar1->ShowPanels = true;
     }
  

請參閱

工作

HOW TO：設定狀態列面板的大小

逐步解說：在執行階段更新狀態列資訊

HOW TO：判斷在 Windows Form StatusBar 控制項中按下的面板

參考

集合編輯器對話方塊

StatusBar 控制項概觀 (Windows Form)

StatusBar

ToolStripStatusLabel