本主題提供 Windows 觸控螢幕裝置的範例報表描述項和範例描述元摘錄。
注意如果您要在行動裝置或 Windows Phone 特定的 SKU 上實作下列描述元，請參閱知識庫文章， (合作夥伴存取所需的) ，以確保您在行動裝置上具有正確的設定。
注意
雖然廠商的特定使用方式可以在報表的任何層級使用，但必須以可在所有報告方法上平均實作的方式使用，也就是序列、平行和混合式。 不符合此指引可能不會造成 HLK 失敗，但可能會導致嚴重的相容性問題。
範例報表描述元
以下是雙指平行/混合模式裝置的範例描述項。
0x05, 0x0d, // USAGE_PAGE (Digitizers)
0x09, 0x04, // USAGE (Touch Screen)
0xa1, 0x01, // COLLECTION (Application)
0x85, 0x01, // REPORT_ID (Touch)
0x09, 0x22, // USAGE (Finger)
0xa1, 0x02, // COLLECTION (Logical)
0x09, 0x42, // USAGE (Tip Switch)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x25, 0x01, // LOGICAL_MAXIMUM (1)
0x75, 0x01, // REPORT_SIZE (1)
0x95, 0x01, // REPORT_COUNT (1)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x95, 0x07, // REPORT_COUNT (7)
0x81, 0x03, // INPUT (Cnst,Ary,Abs)
0x75, 0x08, // REPORT_SIZE (8)
0x09, 0x51, // USAGE (Contact Identifier)
0x95, 0x01, // REPORT_COUNT (1)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x05, 0x01, // USAGE_PAGE (Generic Desk..
0x26, 0xff, 0x0f, // LOGICAL_MAXIMUM (4095)
0x75, 0x10, // REPORT_SIZE (16)
0x55, 0x0e, // UNIT_EXPONENT (-2)
0x65, 0x13, // UNIT(Inch,EngLinear)
0x09, 0x30, // USAGE (X)
0x35, 0x00, // PHYSICAL_MINIMUM (0)
0x46, 0xb5, 0x04, // PHYSICAL_MAXIMUM (1205)
0x95, 0x02, // REPORT_COUNT (2)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x46, 0x8a, 0x03, // PHYSICAL_MAXIMUM (906)
0x09, 0x31, // USAGE (Y)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x05, 0x0d, // USAGE_PAGE (Digitizers)
0x09, 0x48, // USAGE (Width)
0x09, 0x49, // USAGE (Height)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x95, 0x01, // REPORT_COUNT (1)
0x55, 0x0C, // UNIT_EXPONENT (-4)
0x65, 0x12, // UNIT (Radians,SIROtation)
0x35, 0x00, // PHYSICAL_MINIMUM (0)
0x47, 0x6f, 0xf5, 0x00, 0x00, // PHYSICAL_MAXIMUM (62831)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x27, 0x6f, 0xf5, 0x00, 0x00, // LOGICAL_MAXIMUM (62831)
0x09, 0x3f, // USAGE (Azimuth[Orientation])
0x81, 0x02, // INPUT (Data,Var,Abs)
0xc0, // END_COLLECTION
0x09, 0x22, // USAGE (Finger)
0xa1, 0x02, // COLLECTION (Logical)
0x09, 0x42, // USAGE (Tip Switch)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x25, 0x01, // LOGICAL_MAXIMUM (1)
0x75, 0x01, // REPORT_SIZE (1)
0x95, 0x01, // REPORT_COUNT (1)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x95, 0x07, // REPORT_COUNT (7)
0x81, 0x03, // INPUT (Cnst,Ary,Abs)
0x75, 0x08, // REPORT_SIZE (8)
0x09, 0x51, // USAGE (Contact Identifier)
0x95, 0x01, // REPORT_COUNT (1)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x05, 0x01, // USAGE_PAGE (Generic Desk..
0x26, 0xff, 0x0f, // LOGICAL_MAXIMUM (4095)
0x75, 0x10, // REPORT_SIZE (16)
0x55, 0x0e, // UNIT_EXPONENT (-2)
0x65, 0x13, // UNIT(Inch,EngLinear)
0x09, 0x30, // USAGE (X)
0x35, 0x00, // PHYSICAL_MINIMUM (0)
0x46, 0xb5, 0x04, // PHYSICAL_MAXIMUM (1205)
0x95, 0x02, // REPORT_COUNT (2)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x46, 0x8a, 0x03, // PHYSICAL_MAXIMUM (906)
0x09, 0x31, // USAGE (Y)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x05, 0x0d, // USAGE_PAGE (Digitizers)
0x09, 0x48, // USAGE (Width)
0x09, 0x49, // USAGE (Height)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x95, 0x01, // REPORT_COUNT (1)
0x55, 0x0C, // UNIT_EXPONENT (-4)
0x65, 0x12, // UNIT (Radians,SIROtation)
0x35, 0x00, // PHYSICAL_MINIMUM (0)
0x47, 0x6f, 0xf5, 0x00, 0x00, // PHYSICAL_MAXIMUM (62831)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x27, 0x6f, 0xf5, 0x00, 0x00, // LOGICAL_MAXIMUM (62831)
0x09, 0x3f, // USAGE (Azimuth[Orientation])
0x81, 0x02, // INPUT (Data,Var,Abs)
0xc0, // END_COLLECTION
0x05, 0x0d, // USAGE_PAGE (Digitizers)
0x55, 0x0C, // UNIT_EXPONENT (-4)
0x66, 0x01, 0x10, // UNIT (Seconds)
0x47, 0xff, 0xff, 0x00, 0x00, // PHYSICAL_MAXIMUM (65535)
0x27, 0xff, 0xff, 0x00, 0x00, // LOGICAL_MAXIMUM (65535)
0x75, 0x10, // REPORT_SIZE (16)
0x95, 0x01, // REPORT_COUNT (1)
0x09, 0x56, // USAGE (Scan Time)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x09, 0x54, // USAGE (Contact count)
0x25, 0x7f, // LOGICAL_MAXIMUM (127)
0x95, 0x01, // REPORT_COUNT (1)
0x75, 0x08, // REPORT_SIZE (8)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x85, REPORTID_MAX_COUNT, // REPORT_ID (Feature)
0x09, 0x55, // USAGE(Contact Count Maximum)
0x95, 0x01, // REPORT_COUNT (1)
0x25, 0x02, // LOGICAL_MAXIMUM (2)
0xb1, 0x02, // FEATURE (Data,Var,Abs)
0x85, 0x44, // REPORT_ID (Feature)
0x06, 0x00, 0xff, // USAGE_PAGE (Vendor Defined)
0x09, 0xC5, // USAGE (Vendor Usage 0xC5)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff)
0x75, 0x08, // REPORT_SIZE (8)
0x96, 0x00, 0x01, // REPORT_COUNT (0x100 (256))
0xb1, 0x02, // FEATURE (Data,Var,Abs)
0xc0, // END_COLLECTION
請注意，Windows 預期座標 (0，0) 是原生顯示方向的左上角 –直向或橫向。
範例報表描述元摘要 - (延遲模式功能報表)
下列摘錄來自 Windows 螢幕螢幕最上層集合的描述項，選擇性 (強烈建議) 支援延遲模式功能報告。
0x05, 0x0d, // USAGE_PAGE (Digitizer)
0x85, REPORTID_LATENCY, // REPORT_ID (Latency)
0x09, 0x60, // USAGE(Latency Mode)
0x75, 0x01, // REPORT_SIZE (1)
0x95, 0x01, // REPORT_COUNT (1)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x25, 0x01, // LOGICAL_MAXIMUM (1)
0xb1, 0x02, // FEATURE (Data,Var,Abs)
0x95, 0x07, // REPORT_COUNT (7)
0xb1, 0x03, // FEATURE (Cnst,Var,Abs)