Share via

az pscloud pool

Note

This reference is part of the pscloud extension for the Azure CLI (version 2.75.0 or higher). The extension will automatically install the first time you run an az pscloud pool command. Learn more about extensions.

Manage Storage Pool.

Commands

Name Description Type Status
az pscloud pool create

Create a storage pool.

 Extension GA
az pscloud pool delete

Delete a storage pool.

 Extension GA
az pscloud pool get-avs-status

Returns the status of the storage pool connection to AVS.

 Extension GA
az pscloud pool get-health-status

Retrieve health metrics of a storage pool.

 Extension GA
az pscloud pool list

List storage pools by Azure subscription ID.

 Extension GA
az pscloud pool show

Get a storage pool.

 Extension GA
az pscloud pool update

Update a storage pool.

 Extension GA

az pscloud pool create

Create a storage pool.

az pscloud pool create --name --storage-pool-name
                       --provisioned-bandwidth
                       --reservation-id
                       --resource-group
                       --subnet-name
                       --vnet-name
                       --zone
                       [--location]
                       [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                       [--tags]

Examples

StoragePools_Create

az pscloud pool create --resource-group rgpurestorage --storage-pool-name storagePoolname --zone 1 --subnet-name /subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/virtualNetworks/{vnetName}/subnets/{subnetName} --vnet-name /subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/virtualNetworks/{vnetName} --provisioned-bandwidth 100 --reservation-id /subscriptions/{subscriptionId}/providers/PureStorage.Block/reservations/{reservationName} --location eastus

Required Parameters

--name --storage-pool-name -n

Name of the storage pool.

--provisioned-bandwidth

Total bandwidth provisioned for the pool, in MB/s.

Property Value
Parameter group: Properties Arguments
--reservation-id

Azure resource ID of the Pure Storage Cloud service (reservation resource) this storage pool belongs to.

Property Value
Parameter group: Properties Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subnet-name

Azure resource ID of the Virtual Network subnet where the storage pool will be connected.

Property Value
Parameter group: VnetInjection Arguments
--vnet-name

Azure resource ID of the Virtual Network in which the subnet is located.

Property Value
Parameter group: VnetInjection Arguments
--zone -z

Azure Availability Zone the Pool is located in.

Property Value
Parameter group: Properties Arguments

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--location -l

The geo-location where the resource lives When not specified, the location of the resource group will be used.

Property Value
Parameter group: Resource Arguments
--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Resource Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az pscloud pool delete

Delete a storage pool.

az pscloud pool delete [--ids]
                       [--name --storage-pool-name]
                       [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                       [--resource-group]
                       [--subscription]
                       [--yes]

Examples

StoragePools_Delete

az pscloud pool delete --resource-group rgpurestorage --storage-pool-name storagePoolname

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--name --storage-pool-name -n

Name of the storage pool.

Property Value
Parameter group: Resource Id Arguments
--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--yes -y

Do not prompt for confirmation.

Property Value
Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az pscloud pool get-avs-status

Returns the status of the storage pool connection to AVS.

az pscloud pool get-avs-status [--ids]
                               [--name]
                               [--resource-group]
                               [--subscription]

Examples

StoragePools_GetAvsStatus

az pscloud pool get-avs-status --resource-group rgpurestorage --storage-pool-name storagePoolname

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--name -n

Name of the storage pool.

Property Value
Parameter group: Resource Id Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az pscloud pool get-health-status

Retrieve health metrics of a storage pool.

az pscloud pool get-health-status [--ids]
                                  [--name]
                                  [--resource-group]
                                  [--subscription]

Examples

StoragePools_GetHealthStatus

az pscloud pool get-health-status --resource-group rgpurestorage --storage-pool-name storagePoolname

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--name -n

Name of the storage pool.

Property Value
Parameter group: Resource Id Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az pscloud pool list

List storage pools by Azure subscription ID.

az pscloud pool list [--max-items]
                     [--next-token]
                     [--resource-group]

Examples

StoragePools_ListBySubscription

az pscloud pool list

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property Value
Parameter group: Pagination Arguments
--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property Value
Parameter group: Pagination Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az pscloud pool show

Get a storage pool.

az pscloud pool show [--ids]
                     [--name --storage-pool-name]
                     [--resource-group]
                     [--subscription]

Examples

StoragePools_Get

az pscloud pool show --resource-group rgpurestorage --storage-pool-name storagePoolname

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--name --storage-pool-name -n

Name of the storage pool.

Property Value
Parameter group: Resource Id Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az pscloud pool update

Update a storage pool.

az pscloud pool update [--ids]
                       [--name --storage-pool-name]
                       [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                       [--provisioned-bandwidth]
                       [--resource-group]
                       [--subscription]
                       [--tags]

Examples

StoragePools_Update

az pscloud pool update --name spool1 --resource-group rg --provisioned-bandwidth 989

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--name --storage-pool-name -n

Name of the storage pool.

Property Value
Parameter group: Resource Id Arguments
--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--provisioned-bandwidth

Total bandwidth provisioned for the pool, in MB/s.

Property Value
Parameter group: Properties Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False